Sharp pg-d3750 用户手册

iii

SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating 
a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse 
marked

 or 

 and of the same rating as above, which is also indicated on the pin face 

of the plug, must be used.
Always refi t the fuse cover after replacing the fuse. Never use the plug without the fuse 
cover fi tted.
In the unlikely event of the socket outlet in your home not being compatible with the plug 
supplied, cut off the mains plug and fi t an appropriate type.

DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi-
ately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket 
outlet, as a serious electric shock may occur.
To fi t an appropriate plug to the mains lead, follow the instructions below:

WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow : 

Earth

Blue : 

Neutral

Brown : 

Live

As the colours of the wires in the mains lead of this apparatus may not correspond with 
the coloured markings identifying the terminals in your plug proceed as follows:

x

  The wire which is coloured green-and-yellow must be connected to the terminal in the 

plug which is marked by the letter E or by the safety earth symbol 

 or coloured green 

or green-and-yellow.

x

 The wire which is coloured blue must be connected to the terminal which is marked 

with the letter N or coloured black.

x

 The wire which is coloured brown must be connected to the terminal which is marked 

with the letter L or coloured red.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.