Sharp lc-40c37u 连接指南
21
Signal Strength
Channel Strength
Signal Strength
Current
Max
0
0
Signal Strength
Current
CH
Max
0
1 2
0
Signal Strength
Channel Strength
Basic adjustment settings
Antenna Setup - DIGITAL
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
obtain the maximum signal strength.
Signal Strength
• On: Skips channels. (Channel selection disabled using CH
r/s .)
• Off: Does not skip channels. (Channel selection enabled
using CH
r/s.)
Press
a/b to select ANALOG (Air), ANALOG
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
then press ENTER.
When viewing ANALOG broadcasts:
1 Press c/d to select the channel to skip, and
then press
b to move down.
2 Press c/d to select “On”, and then press
ENTER
.
When viewing DIGITAL broadcasts:
1 Press a/b to select the channel to skip, and
then press
c/d to select “On”.
Press MENU and the MENU screen displays.
Press
a/b to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the
4-digit secret number here. See page 38 for
setting a secret number.
setting a secret number.
Press
c/d to select “Setup”.
Press
a/b to select “CH Memory”, and then
press ENTER.
Channel memory setting
Press MENU and the MENU screen displays.
Press
c/d to select “Setup”.
Press
a/b to select “Antenna Setup -
DIGITAL”, and then press ENTER.
Channel Strength
The channel signal strength can also be checked
separately.
The channel signal strength can also be checked
separately.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL
Antenna Setup - DIGITAL
Input the 2-digit channel number to check
the signal strength of the selected channel.
the signal strength of the selected channel.
• Make sure the signal is strong enough for each
channel.
Press
a/b to select “Channel Strength”,
and then press ENTER.
Press
a/b to select “Signal Strength”.
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based on
the current channel.
the current channel.
NOTE
• This function is available for DIGITAL (Air) only.
1
2
3
4
5
6
1
2
3
4
1
2
3
NOTE
• Make sure what kind of connection is made with your TV.
Press MENU to exit.
7
Press MENU to exit.
5
Press MENU to exit.
4