Amana a1rxngfy 用户指南

下载
页码 36
12
2. Replace the shelf by tilting the back end downward to align 
the back shelf tab under the track on each side of the freezer. 
Gently push the shelf into the freezer until the two center shelf 
tabs are positioned within the opening in each track. Lower 
the shelf to rest on the shelf tracks. 
Frozen Food Storage Guide
Storage times will vary according to the quality and type of food, 
the type of packaging or wrap used (should be airtight and 
moisture-proof), and the storage temperature. Seal the package 
or container securely to avoid taste and odor transfer throughout 
the product. Ice crystals inside a sealed package are normal. This 
simply means that moisture in the food and air inside the package 
have condensed, creating ice crystals.
Put no more unfrozen food into the freezer than will freeze within 
24 hours (no more than 2 to 3 lbs of food per cubic foot [907 to 
1,350 g per L] of freezer space). Leave enough space in the 
freezer for air to circulate around packages. The freezer door must 
close tightly. 
NOTE: For more information on preparing food for freezing, check 
a freezer guide or reliable cookbook.
DOOR FEATURES
Your model may have some or all of these features. 
Door Rails
The door rails may be removed for easier cleaning.
Snap on Door Rails on some models)
To remove and replace the rails:
1. Remove the door rails by pushing in slightly on the front of the 
bracket while pulling out on the inside tab. Repeat these steps 
for the other end.
2. Replace the rails by aligning the ends of the brackets with the 
buttons on the sides of the door liner. Firmly snap bracket and 
assembly onto the tabs above the shelf as shown.
Style 1 - Door Rails 
Style 2 - Trivets
Door Bins
(on some models)
To remove and replace the racks/bins:
1. Remove the rack/bin by lifting it and pulling it straight out.
2. Replace the rack/bin by sliding it in above the desired support 
and pushing it down until it stops.
Utility Compartment and Can Caddy
To remove and replace the utility compartment:
1. Remove the utility compartment by raising and holding the 
cover up while lifting the utility compartment up and pulling it 
straight out.
2. Replace the utility compartment by sliding it in above the 
desired support and pushing it down until it stops.
To remove and replace the can caddy:
1. Hold the can caddy with one hand and pull up until it is 
released from the door liner. Then, pull up on the caddy again, 
until the stoppers have been overcome. 
2. Pull the can caddy straight out to remove it from the door. 
3. Replace the can caddy by aligning the grooves on the sides 
with the pins in the door liner. Push up on the bottom of the 
caddy until the stoppers have been overcome, and slide it fully 
into the compartment.