Amana AFF2534FE 用户指南

下载
页码 40
12
NOTE: Having someone push against the top of the 
refrigerator takes some weight off the leveling screws. This 
makes it easier to turn the screws. It may take several turns of 
the leveling screw to adjust the tilt of the refrigerator.
To raise, turn the leveling screw clockwise.
To lower, turn the leveling screw counterclockwise. 
NOTE: Your refrigerator may have a rear roller adjustment 
screw on each side. To raise or lower the rear of the 
refrigerator, use a 
³⁄₈" hex driver to turn the screws.
3. Open the door again to make sure that it closes as easily as 
you like. If not, tilt the refrigerator slightly more to the rear by 
turning both leveling screws clockwise. It may take several 
more turns, and you should turn both screws the same 
amount.
4. Replace the base grille.
REFRIGERATOR USE
Opening and Closing Doors
(French door models)
There are two refrigerator compartment doors. The doors can be 
opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
When the left side door is opened, the hinged seal 
automatically folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically 
forms a seal between the two doors. 
Using the Controls
The temperature controls are located at the top front of the 
refrigerator or freezer compartments. 
Temperature Controls
For your convenience, the temperature controls are preset at the 
factory. When you first install your refrigerator, make sure the 
controls are still set to the recommended setting as shown.
Style 1
Recommended Setting “4”
Style 2
Recommended Setting “4” 
IMPORTANT: 
The recommended setting should be correct for normal 
household refrigerator use. The controls are set correctly 
when milk or juice is as cold as you like and when ice cream 
is firm.
Wait 24 hours for your refrigerator to cool completely before 
adding food. If you add food before the refrigerator has 
cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature 
controls to a colder than recommended setting will not cool 
the compartments any faster.
If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls. 
To Turn Off/On:
Style 1 Press the freezer down arrow touch pad until a
dash (-) appears in both the refrigerator and freezer displays. 
Neither compartment will cool. 
Style 2 Turn the freezer control to the word OFF. Neither 
compartment will cool when the freezer is set to OFF. 
Energy Saver Option (on some models)
The energy saver option turns off the heater which helps to 
reduce moisture on the door hinge seal. The refrigerator uses 
more energy when Energy Saver is off.
Press the control to ON to save energy when the environment 
is less humid. 
Press the control to OFF when the environment is warm and 
more humid, or if you notice moisture on the door hinge seal. 
A. Rear roller adjustment screw
B. Leveling screw
A. Hinged seal
B
A
A