Electrolux EI30ES55JS 用户指南
34
Electronic Control Settings
useR PRefeRences
(continued)
settinG clock disPlay — on oR off
The oven control can be programmed to display the time of day or not. The oven has been
preset at the factory to display the time of day.
changing clock display between on and off:
1. Press
USER PREF
until you get to the CLO on menu page.
2. Press
-
lo
or
+
hi
to toggle between displaying or hiding the clock.
3. Press
START
to accept the changes and go back to user preferences menu display.
settinG tiMe of day disPlay — 12 oR 24 houRs
The oven control can be programmed to display time of day in 12 hours or 24 hours mode.
The oven has been preset at the factory to display in 12 hours mode.
changing between 12 or 24 hour time of day display:
1. Press
USER PREF
until you get to the CLO 12hr menu page.
2 Press
-
lo
or
+
hi
to toggle the display of the clock in 12 or 24 hours.
3. Press
START
to accept the changes and go back to user preferences menu display.
4. Remember to set your clock after changing the time of day display mode.
settinG teMPeRatuRe disPlay — fahRenheit oR
celsius
celsius
The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The
oven has been preset at the factory to display in Fahrenheit.
to change display from fahrenheit to celsius or celsius to fahrenheit:
1. Press
USER PREF
until you get to the F-C F menu page.
2. Press
+
hi
or
-
lo
to toggle between the
°C and °F display options.
3. Press
START
to accept the changes and go back to user preferences menu display.
settinG continuous bake oR 12 houR eneRGy saVinG
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut
off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven
can be programmed to override this feature for Continuous Baking.
changing between 12 hour energy saving and continuous bake:
1. Press
USER PREF
until you get to the E S menu page.
2. Press
+
hi
or
-
lo
to toggle the energy saving setting on and off.
3. Press
START
to accept the changes and go back to user preferences menu display.