IQinVision iqm30ne-b5 安装指导
10
1. Insert the IQtools CD into the CD drive of the PC. Once the CD starts, run IQfinder
either from the CD by clicking “Scan for IQeye cameras on my network” or by
installing IQfinder on the local machine by selecting “Install IQfinder”.
installing IQfinder on the local machine by selecting “Install IQfinder”.
2. Click “Scan for IQeye cameras on my network” to find IQeye cameras (Figure
13.1). The detected cameras will be displayed in the IQfinder window. Select a
camera from the list and click “Assign IP” to edit the
selected camera’s network settings.
camera from the list and click “Assign IP” to edit the
selected camera’s network settings.
3. The “Assign IP” window allows the IP address,
Subnet, and Gateway of the camera to be changed
and alternatively the camera to be configured for
DHCP operation. Click the ”Apply” button after
making the desired changes (Figure 13.2).
and alternatively the camera to be configured for
DHCP operation. Click the ”Apply” button after
making the desired changes (Figure 13.2).
NOTE: Changing between a static IP address and
DHCP will cause the camera to reboot.
DHCP will cause the camera to reboot.
4. To view a camera, double click a camera entry or
highlight a camera in the list and click the “Web
Page” button (Figure 13.3). The “Live” page
will be displayed through the default browser (IE
recommended). It is also possible to open Internet
Explorer and enter the IP address of the IQeye camera
in the address field of the browser. If prompted, install
the Active X control (Figure 13.4).
Page” button (Figure 13.3). The “Live” page
will be displayed through the default browser (IE
recommended). It is also possible to open Internet
Explorer and enter the IP address of the IQeye camera
in the address field of the browser. If prompted, install
the Active X control (Figure 13.4).
5. To perform further configuration of the camera click
on the “Setup” tab.
NOTE: The default username is “root” and the
default password is “system”.
default password is “system”.
6. To prepare the camera to serve the H.264 stream
(Alliance-mx), select H.264 from the video format
drop-down (Figure 13.5). To view the H.264 stream
full screen (without “Live” page controls), double
click on the video area. Double click on the video
image again to return back to the “Live” page.
drop-down (Figure 13.5). To view the H.264 stream
full screen (without “Live” page controls), double
click on the video area. Double click on the video
image again to return back to the “Live” page.
7. For additional information and technical documents,
please visit
www.IQeye.com/faq.
Figure 13.1
Figure 13.2
Figure 13.4
Figure 13.3
Figure 13.5