OKI ML490 用户指南

Microline 490/491 User’s Guide

Important
Do not use the platen knob to change the Top of Form. If you
turn the platen knob when the printer is turned on, the Top of
Form misaligns. Always turn the printer off before turning
the platen knob!

To move the Top of Form position lower for one page only:

1 Press 

 to deselect the printer.

2 Press 

 to lower the position of the Top of Form.

The factory default setting for the Top of Form (where the
printing should begin) is 1" down from the top of the page.

To reset the Top of Form to the factory default:

1 Remove paper from the paper path.

2 Turn the printer off.

3 Press and hold 

 + 

 while turning on the

printer.

4 Reload paper.