Atlas Sound C12BT60 产品宣传册
1601 Jack McKay Blvd.
Ennis, TX 75119
Ennis, TX 75119
www.AtlasSound.com
Tech Support 1.800.876.3333
Printed in the USA
Specifications are subject to change without notice.
Specifications are subject to change without notice.
©2003 Atlas Sound LP. Atlas Sound is a trademark of Atlas Sound LP. All rights reserved.
ATS001517 RevA 2/03
000203
484063
SPECIFICATIONS
FULL RANGE COAXIAL LOUDSPEAKER
MODEL
C12BT60
FREQUENCY RESPONSE (±10dB)
40Hz to 20kHz
FREQUENCY RESPONSE (±3dB)
68Hz to 15kHz
POWER HANDLING
100 Watts
SENSITIVITY
95dB
MAX. SPL @ 1METER
113dB
(Transformer Limited @ 60W)
NOMINAL IMPEDANCE
8 ohm
CROSSOVER FREQUENCY
2750 Hz
DISPERSION ANGLE
90 Degrees
LF TRANSDUCER
BASKET MATERIAL
Cast Aluminum
CONE MATERIAL
Treated Paper
SURROUND MATERIAL & DAMPENING
Treated Accordian Cloth Edge
VOICE COIL DIAMETER
1.5" (38mm)
MAGNET WEIGHT
30 oz. (.85g)
HF TRANSDUCER
DIAPHRAGM MATERIAL
Treated Laminated Silk
VOICE COIL DIAMETER
1" (25mm)
VOICE COIL FORMER MATERIAL
Aluminum
VOICE COIL MATERIAL
Copper
MAGNET WEIGHT
10 oz. (283g)
TOP PLATE THICKNESS
0.125 (3mm)
TRANSFORMER
Frequency Response: 33Hz to 21kHz (±2dB)
Primary Taps @ 70.7V: 60,30,15,7.5
Maximum Insertion Loss 1dB
DIAMETER & DEPTH
12.875" (327mm) Dia. & 4.1875" (106mm) Deep
MOUNTING DIMENSIONS
11.625" (295mm) Bolt Circle
NET WEIGHT (Less Transformer)
10.5 lbs (4.76kg)
Recommended Enclosure For Maximum
Low Frequency Performance****
Low Frequency Performance****
Atlas Sound Q4412 (2 Ft
3
, .054m
3
)
Q Series Enclosures
The C12BT60 will work well in even the smallest volume Q series
enclosure (Q4412 2 cubic feet) with a 3dB down point of 68Hz. If
required, bass response can be extended with larger volume enclo-
sures. Atlas Sound’s model 95-12 round enclosure may also be used
with model 61-12W baffle.
enclosure (Q4412 2 cubic feet) with a 3dB down point of 68Hz. If
required, bass response can be extended with larger volume enclo-
sures. Atlas Sound’s model 95-12 round enclosure may also be used
with model 61-12W baffle.
Q418
*
Rated power based on EIA specification -
**
Averaged from 500 Hz to 2.5 kHz
***
Dispersion angle = 6dB down point at 2 kHz
****
When used in full space anechoic with the Atlas Sound Q4412 two cu. ft. enclosure the C12BT60 operates within a frequency response range of 68 Hz - 20 kHz (±3dB).
Sensitivity is 95dB (1W/1M). Dispersion angle is 90° @ 2kHz.
Sensitivity is 95dB (1W/1M). Dispersion angle is 90° @ 2kHz.
• Five Year Limited Warranty •