Philips HTS6500 快速安装指南

1

Connect

A 

Placement

Proper speakers system placement is important to 
ensure optimum sound performance.

A

  Place the SonoWave speakers at the normal 

listening ear level, equal distance from the TV and 
face straight ahead towards the listening area.

B

  Place the subwoofer on the floor, at least one meter 

away from the TV.

2

Set up

B 

Connect the radio antennas

Keep the antennas away from the electronic devices to 
prevent unwanted interference.

~

12 mm

A

B

C

A

  Connect the FM antenna to the FM jack.  Extend the 

wire and fix its end to the wall.

B

  Unfold the AM/MW loop antenna and fix the claw 

into the slot.

C

  Push the tabs and insert the wires into the AM/MW 

jacks.

C

 

Connect the SonoWave speakers 

and subwoofer

Connect the left speaker to the FRONT LEFT jack, right 
speaker to the FRONT RIGHT jack and the subwoofer 
to the SUBWOOFER jack at the rear of the DVD 
system.

~

DVD system (rear)

SUBWOOFER

FRONT 

RIGHT

FRONT 

LEFT

A 

Finding the viewing channel

A

 Press STANDBY ON on the DVD system. 

B

 Press SOURCE on the DVD system until “DISC” 

appears on the display panel. 

C

  Turn on the TV.  Use the TV’s remote control to 

select the correct viewing channel for the DVD 
system.

 

You should see the blue DVD background on the 
TV.

Note   To search for the correct viewing channel, 
press the Channel Down button on the TV’s remote 
control repeatedly (or AV, SELECT, 

°

  button) until 

you see the blue DVD background. If you are using a RF 
modulator, set the TV to channel 3 or 4.

B 

Setting up the SonoWave speakers

A

  Press and hold SOUND on the remote control to 

enter the SonoWave speaker settings mode.

B

 Use W X keys to view the available settings (ROOM 

ACOUSTICS, SPEAKER DISTANCE, LISTENING 
POSITION) and press OK to select. 

C

 Use W X keys to select a most suitable predefined 

setting and press OK to confirm. 

ROOM ACOUSTICS  

 HARD - for concrete/glass walls.
 SOFT - for wooden walls.
 SPEAKER DISTANCE  
 NEAR - ‘X’ is less than 1 meter.
 DEFAULT - ‘X’ is between 1~2.5 meters.
 FAR - ‘X’ is more than 2.5 meters.
 LISTENING POSITION  
 NEAR - ‘Z’ is less than 1.5 meter.
 DEFAULT - ‘Z’ is between 1.5~2.5 meters.
 FAR - ‘Z’ is more than 2.5 meters.

Note   The underlined options are the default setting.  

D 

Connect the DVD system to TV

~

A

  Use the supplied composite video cable to connect 

the CVBS jack on this DVD system to the VIDEO IN 
jack on your TV.

B

 

Plug in the power cables from the DVD system and 
TV to the AC power outlets.

Note   It is important to connect the DVD system 
directly to your TV.  

DVD System (rear)

Television ( rear)

E 

Connect the audio from TV to DVD 

system (optional)

To hear the TV audio through this home theater system, 
use the red and white audio cables (not supplied) to 
connect the TV IN (R/L) jacks on this DVD system to 
the AUDIO output jacks on your TV.

~

Note   Press TV on the remote control to get the 
sound output from the speakers system when watching 
the TV program.  

DVD System (rear)

Television ( rear)

To off-air 
antenna or 
set-top box

DVD System (rear)

Ensure that this portion is 

fully inserted in to the jack.