Philips 37 用户手册

49

WARNING
Under no circumstances should you try to repair this unit yourself, as this will
invalidate the warranty. Do not open this unit as there is a risk of electric shock.

If a fault occurs, fi rst check the points listed below before taking this unit for repair. If
you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.

–  Press STANDBY-ON on the unit to turn on the 

power.

–  Ensure that the interconnect cable between the 

subwoofer and main unit are connected.

–  Refer to your TVs manual for correct Video In 

channel  selection. Change the TV channel until you 
see the DVD screen.

–  Press DISC to select disc mode.
–  If this happens when you turn on the progressive scan 

feature or change the HDMI video setting, wait for 15 
seconds for the auto recovery or switch back to the 
default mode as below:

1)  Press OPEN/CLOSE to open the disc compartment.
2)  Press cursor left key on the remote control.
3)  Press AUDIO on the remote control. 

–  Check the video connection.
–  Sometimes a small amount of picture distortion may  

 appear. This is not a malfunction.

–  The disc is dirty. Clean the disc.

–  Adjust the volume.
–  Check the speaker connections and settings.
–  Make sure that the audio cables are connected and 

press SOURCE to select the correct input source (for 
example, TV or AUX) to choose the device that you 
want to hear through this unit.

–  Press AMBISOUND to select a correct surround 

sound setting.

–  Make sure that the source you are playing is recorded 

or broadcast in surround sound (DTS, Dolby Digital, 
etc.).

–  Select the source you want to play (for example, 

DISC or RADIO) before pressing the function button 
(X, ./ >.)

–  Reduce the distance between the remote control and 

this unit.

–  Batteries are weak, replace the batteries.