Esq 07100732 用户指南
16
17
BIG DATE 3-HAND MODELS
Figure 4
Crown Positions:
Position 1 - Normal position. Crown pushed
Position 1 - Normal position. Crown pushed
against case. (Watch runs)
Position 2 - Position for QUICK CHANGE of
BIG DATE. Rotate crown clock-
wise. (Watch continues to run)
wise. (Watch continues to run)
Position 3 - To set TIME: Rotate crown in
either direction. (Watch stops)
To manually wind an automatic
movement:
The motion of your arm during normal daily
activities should be sufficient to keep the
movement of your automatic timepiece
wound. However, if you have not worn your
watch for several days, and the movement
has stopped, you will need to wind it by
hand before resetting the time:
movement:
The motion of your arm during normal daily
activities should be sufficient to keep the
movement of your automatic timepiece
wound. However, if you have not worn your
watch for several days, and the movement
has stopped, you will need to wind it by
hand before resetting the time:
1. With crown in position 1, flush against the
case, turn crown clockwise, completing
approximately 20 revolutions.
case, turn crown clockwise, completing
approximately 20 revolutions.
2. Reset time and date following instructions
above.
above.
3. Push crown back in to position 1, flush
against case.
against case.