Cobra 29ltd hd le 操作指南
Setting Dynamike
This controls the microphone sensitivity
(outgoing audio level).
(outgoing audio level).
To Transmit
21
To Transmit
Transmit
20
Setting
Dynamike
Dynamike
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
Be sure to read the F.C.C. Rules
and Regulations included with
this unit before transmitting.
and Regulations included with
this unit before transmitting.
Operation
Operation
1
Select desired channel.
1
Initially, set fully clockwise so that
maximum voice volume is available. Dynamike
may have to be reduced in some conditions.
maximum voice volume is available. Dynamike
may have to be reduced in some conditions.
Transmit
Push and hold mic button to transmit.
Transmitter is now activated. When
transmitting, hold the microphone two inches
from your mouth and speak in a clear, normal
voice. Release to receive.
Transmitter is now activated. When
transmitting, hold the microphone two inches
from your mouth and speak in a clear, normal
voice. Release to receive.
1