Runco CL-810 用户手册
8
Runco CL-810 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
3.
COMP 1 (RCA connectors)
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for
component video from sources such as DVD players.
component video from sources such as DVD players.
4.
COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, laser disc player or other
composite video source.
composite video source.
5.
S-VIDEO
A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
(S-VHS) VCR.
6.
POWER INPUT (100 to 240 VAC)
Connect the CL-810 to power here.
7.
MAIN POWER SWITCH
Disconnects or applies power to the CL-810.
8.
RS-232 CONTROL PORT
A female, RJ-11 connector for interfacing with a PC or home theater
automation/control system.
automation/control system.
9.
12-VOLT (250 mA) TRIGGER OUTPUT (3.5-mm, mini phono jack)
Connection for a 12-volt trigger-controlled device. This can be a retractable screen,
screen mask or the Runco CineWide with AutoScope system.
screen mask or the Runco CineWide with AutoScope system.
10. COMP 2 / RGB
Five, BNC connectors for connecting either RGB or component (YPbPr)
high-definition television signals. (The CL-810 automatically detects the signal format.)
high-definition television signals. (The CL-810 automatically detects the signal format.)
For best results, do not run your DVD player in progressive mode.
Tip