Runco cl-410 产品宣传册
Specifications are subject to change without notice. Optional ceiling bracket available.
© 2008 Runco International, Inc. All rights reserved. Reflection, Enhanced GEN3, Vivix, Virtual Cinema, CSMS, CineWide, AutoScope, CinOptx, O-Path,
SLIC, Selectable Lamp Intensity Control, LiveLink, AxiShift, SuperOnyx and VirtualWide are trademarks of Runco International, Inc.
Digital Light Processing, DLP and DMD are trademarks of Texas Instruments.
ISF is a trademark of Imaging Science Foundation.
CinemaScope is a trademark of Twentieth Century Fox Film Corporation.
Theater installation photo courtesy of Electronics Design Group, Inc., Piscataway, NJ
SLIC, Selectable Lamp Intensity Control, LiveLink, AxiShift, SuperOnyx and VirtualWide are trademarks of Runco International, Inc.
Digital Light Processing, DLP and DMD are trademarks of Texas Instruments.
ISF is a trademark of Imaging Science Foundation.
CinemaScope is a trademark of Twentieth Century Fox Film Corporation.
Theater installation photo courtesy of Electronics Design Group, Inc., Piscataway, NJ
*ANSI Lumen specification:
This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in
RUNCO literature to allow for direct comparison with other manufacturer’s projectors. These measurements can be taken at 9,000
to 13,000º Kelvin to get expected performance data when the projector is used in professional, commercial, and industrial displays.
**CSMS Home Theater Calibration ANSI Lumen Specification:
**CSMS Home Theater Calibration ANSI Lumen Specification:
These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated to ISF
specifications including setting the color temperature to 6500º Kelvin, the standard for reproducing video.
**CSMS Home Theater Calibration foot-Lambert (fL) Specification:
This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture
and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate
(without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema
theaters using DLP™ technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.
All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650
All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650
SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD, and a Stewart Filmscreen StudioTech 130,
1.3 gain 72-inch wide screen. The projector is calibrated to a color temperature of 6500º Kelvin and has a minimum of 150 hours
of usage.
Specifications
CL-410
RS-440/RS-440LT
RS-900
RS-1100
RS-1100 Ultra
Projector Type:
Digital Light Processing (DLP™), Single-Chip DMD™
Digital Light Processing™ (DLP™), Single-chip, 16:9
SuperOnyx™ DMD™
Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
Digital Light Processing (DLP)
Single-Chip SuperOnyx DMD
Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
Native Resolution:
1024 x 576
1280 x 720 (16:9)
1920 x 1080 (16:9)
1920 x 1080 (16:9)
1920 x 1080 (16:9)
Aspect Ratios:
4:3, Letterbox, 16:9 Anamorphic, VirtualWide
®
, Cinema,
Virtual Cinema™
4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema,
Virtual Cinema
4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema,
Virtual Cinema
4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema,
Virtual Cinema
4:3, Letterbox, 16:9 Anamorphic, Virtual Wide, Cinema,
Virtual Cinema
Video Standards:
NTSC, PAL, ATSC
NTSC, PAL, ATSC
NTSC, PAL, ATSC
NTSC, PAL, SECAM, ATSC
NTSC, PAL, SECAM, ATSC
DTV Compatibility:
480i, 480p, 576i, 576p, 720p, 1080i
480i, 480p, 576i, 576p, 720p, 1080i. 1080p
480i, 480p, 576i, 576p, 720p, 1080i. 1080p
480i, 480p, 576i, 576p, 720p, 1080i. 1080p
480i, 480p, 576i, 576p, 720p, 1080i. 1080p
Picture Size
(16:9 screens)
Recommended Width: 72 in. (1.83m) to 96 in. (2.44m)
Maximum Width: 150 in.
Recommended Width: 72 in. (1.83m) to 96 in. (2.44m)
Recommended Width: 72 in. (1.83m) to 96 in. (2.44m)
Recommended Width: 72 in. (1.83m) to 96 in. (2.44m)
Maximum Width: 200 in. (5.08m)
Recommended Width: 72 in. (1.83m) to 96 in. (2.44m)
Maximum Width: 200 in. (5.08m)
Throw Distance
(Factor x Screen Width)
(All CineWide™ Throws
(All CineWide™ Throws
are specified using a 2.35:1
screen)
Zoom 1.37 – 1.67
RS-440:1.40 – 1.70:1
RS-440LT: 1.73 – 2.10:1
Cinewide available on RS-440LT
RS-440LT: 1.73 – 2.10:1
Cinewide available on RS-440LT
Lens Options:
1.87 - 2.20:1
1.87 - 2.20:1 CineWide (Whitney) in 2.35:1 aspect
1.52 - 1.69:1 CineWide (Rainier) in 2.35:1 aspect
1.40 - 1.65:1 CineWide (McKinley) in 2.35:1 aspect
1.52 - 1.69:1 CineWide with AutoScope (Rainier) in 2.35:1
1.87 - 2.20:1
1.87 - 2.20:1 CineWide (Whitney) in 2.35:1 aspect
1.52 - 1.69:1 CineWide (Rainier) in 2.35:1 aspect
1.40 - 1.65:1 CineWide (McKinley) in 2.35:1 aspect
1.52 - 1.69:1 CineWide with AutoScope (Rainier) in 2.35:1
aspect
1.40 - 1.65:1 CineWide with AutoScope (McKinley) in
1.40 - 1.65:1 CineWide with AutoScope (McKinley) in
2.35:1 aspect
1.55 to 1.93 (1.86 to 1.93 with CineWide)
Proteus Lens Options:
B: Zoom 1.03 – 1.20
C: Zoom 1.23 – 1.47
D: Zoom 1.53 – 1.97
B: Zoom 1.03 – 1.20
C: Zoom 1.23 – 1.47
D: Zoom 1.53 – 1.97
(with CineWide 1.20 – 1.58)
E: Zoom 2.00 – 3.01
(with CineWide 1.63 – 2.36)
F: Zoom 3.05 – 4.75
(with CineWide 2.33 – 3.58)
(Proteus B or C options not
available with CineWide or
CineWide w/AutoScope)
Horizontal and Vertical
Offset Without CineWide
Option:
(Note: With CineWide
Option:
(Note: With CineWide
option offsets vary per
lens. Please contact Runco
Technical Support for more
information.)
Horizontal shift: ± 8%,
Vertical shift: Up to 40% above screen center, up to 60%
below screen center
Horizontal shift: +/-8% (half width)
Vertical: 115% up from center of screen (half height), as
Vertical: 115% up from center of screen (half height), as
much as 100% down from center of screen (half height)
- ceiling mount
Motorized vertical: 120% up from center of screen (half
height), as much as 80% down from center of screen (half
height) - ceiling mount
Varies per lens. Contact Runco technical support
Varies per lens. Contact Runco technical support
Light Output:
CSMS™** Specifications:
Home Theater Calibration: 412 ANSI Lumens;
16 Foot-Lamberts (fL);
800 ANSI Lumens*
CSMS** Specifications: Home Theater Calibration: 421
ANSI Lumens;
16.3 Foot-Lamberts (fL);
16.3 Foot-Lamberts (fL);
850 ANSI Lumens*
CSMS** Specifications: Home Theater Calibration:
438-543 ANSI Lumens;
13.9-19.8 Foot-Lamberts (fL);
13.9-19.8 Foot-Lamberts (fL);
1200 ANSI Lumens*
CSMS Specifications:
Home Theater Calibration: 442-591 ANSI Lumens;
14.9-21.8 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
†Variable depending on RVR calibration;
1300 ANSI Lumens
CSMS Specifications:
Home Theater Calibration: 442–591 ANSI Lumens;
14.9–21.8 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
†Variable depending on RVR calibration;
1300 ANSI Lumens
Contrast Ratio:
CSMS** Contrast Ratio: 221:1; 2500:1
CSMS** Contrast Ratio: 230:1, 3000:1 ANSI
CSMS** Contrast Ratio: 200-220:1;
3000:1 typical (sequential)
CSMS** Contrast Ratio: 205:1–225:1; 1600:1–3200:1
CSMS** Contrast Ratio: 205:1-225:1; 1600:1-3200:1
Lamp:
250W NSH
230W UHP
200W UHP
250W
250W
Lamp Life:
2000 hours
2000 Hours
2500 hours
2000 Hours
2000 Hours
Inputs:
(1) Video, (1) S-video, (2) Component,
(1) HDMI w/HDCP, (1) RGB DB15 (1) RS-232
(1) HDMI, (1) DVI-I, (1) Composite, (1) S-Video,
(1) Component (RCA x3)
(1) RS-232 (9-pin DIN)
(2) HDMI, (1) Composite, (1) S-Video,
(1) Component (RCA x3), (1) RGB/Component (BNC x 5),
(1) RS-232 (RJ-11)
(1) Composite Video, (1) S-Video,
(1) RGB/Component Video (BNC connectors),
(1) RCA Component Video, (1) HDMI
(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232
12V Output:
Max. 0.25 Amps, active when the
projector is on
(1) 12V DC, 250mA (3.5mm mini-jack)
(1) 12V DC, 250mA (3.5mm mini-jack)
Max. 0.25 Amps, active when Cinema or Virtual Cinema
Aspect Ratio is selected (CineWide versions only) or
when projector is turned on
Max. 0.25 Amps, active when Cinema or Virtual Cinema
Aspect Ratio is selected (CL-810 Ultra/CineWide with
AutoScope only) or when projector is on
Power Requirements:
100 – 240V AC, 50/60Hz, 370W
100 - 240V VAC (auto-sensing), 50/60 Hz, 340W
100 - 240V VAC (auto-sensing), 50/60 Hz, 340W
100 to 240 VAC (auto-sensing), 50/60 Hz, 310 W
100-240V AC, 50/60 Hz, 310W
Operating
Environments:
41 to 95ºF (5 to 35ºC);
20-80% humidity (non-condensing)
40°– 95° F, (5°–35° C),
10%–90% Humidity (non-condensing)
40°– 95° F, (5°–35° C),
10%–90% Humidity (non-condensing)
41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)
41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)
Dimensions
(w/o feet):
Width: 14 in. (356.00 mm)
Depth: 16 7/8 in. (429.00 mm)
Height: 7 3/8 in. (188.00 mm)
Weight: 25lbs. (11.34kg)
Width: 14 in. (356 mm)
Depth: 16.7/8 in. (429 mm)
Height: 7 3/8 in. (188 mm)
Weight: 25 lbs. (11.34 kg)
Width: 19 11/16 in. (500.06 mm),
Depth: 18 1/4 in. (462.50 mm),
Height: 8 15/16 in. (224.77 mm),
Weight: 34 lbs. (15.42 kg) (with standard lens)
Width: 19 11/16 in. (500.06 mm)
Depth: 18 1/4 in. (462.50 mm)
Height: 8 15/16 in. (224.77 mm)
Weight: 34 lbs. (15.42 kg)
Width: 19 11/16 in. (500.06 mm)
Depth: 22 in. (559.00 mm)
Height: 8 7/8 in. (226.00 mm)
Weight: 36 lbs. (16.32 kg)
Limited Warranty:
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user
Lamp Warranty: 1000 hours or (6) six months, which ever
Lamp Warranty: 1000 hours or (6) six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
1/08
Engineered for ISF
®
calibration.
1195 NW Compton Drive, Beaverton, OR 97006
1-800-237-8626
www.runco.com