Runco rs 440lt 用户指南
6
Runco RS-440 Installation/Operation Manual
PRE
L
IMINAR
Y
6.
FRONT IR SENSOR
7.
ZOOM/FOCUS RING
Use this to change the projected image size or focus the image.
8.
EXHAUST VENT
9.
HORIZONTAL LENS SHIFT DIAL
Shifts the image left or right.
10. TEMPERATURE INDICATOR
Flashes blue when the projector is overheated.
11. POWER/STANDBY INDICATOR
Indicates power status as follows:
• Lights solid blue when the projector is in standby mode
• Off during normal operation
• Flashes blue after the projector is turned off to indicate that the lamp is cooling down
2.2
RS-440 Rear Panel
RS-440 Rear Panel
Figure 2-2 shows the RS-440 rear panel.
Figure 2-2. RS-440 Rear Panel
1.
12-VOLT (250 mA) TRIGGER OUTPUT (3.5-mm mini phono jack; Tip = +12V;
Sleeve = Ground)
Sleeve = Ground)
Connection for a retractable screen, screen mask or other, 12-volt trigger-activated
device.
device.
2.
RS-232 CONTROL PORT
A female, 9-pin mini-DIN connector for interfacing with a PC or home theater
automation/control system.
automation/control system.
8
5
6
3
4
2
1
7