Runco rs 440lt 用户指南
Runco RS-440 Installation/Operation Manual
13
PRE
L
IMINAR
Y
3.2
Quick Setup
Quick Setup
Table 3-1 gives a quick overview of the RS-440 installation process. The sections
following this one provide detailed instructions.
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
installation specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, Refer to
page...
1
Choose a location for the projector
2
If installing an RS-440LT/CineWide: Install CineWide
lens base plate (optional)
lens base plate (optional)
3
Mount the projector
4
Connect signal sources to the RS-440
5
Connect external controller to RS-232 port (optional)
6
Connect 12-volt trigger output to retractable screen or
other, 12-volt trigger-activated equipment (optional)
other, 12-volt trigger-activated equipment (optional)
7
Apply power to the projector
8
Change the OSD Language (optional)
9
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
the proper picture orientation
10
Primary lens adjustments: projected image size (zoom),
position (shift) and focus
position (shift) and focus
11
Install CineWide anamorphic lens (optional)
12
CineWide lens adjustments: position, pitch (angle),
geometry and focus
geometry and focus
13
Projector calibration: adjust the following for each input;
save settings when finished:
Aspect ratio
Brightness
Contrast
Color level
Tint
Input position
save settings when finished:
Aspect ratio
Brightness
Contrast
Color level
Tint
Input position
Note