Runco rs 440lt 用户指南
Runco RS-440 Installation/Operation Manual
47
PRE
L
IMINAR
Y
To access the Installation adjustments, press MENU, then press the
or
button to
highlight Installation and press ENTER. The Installation sub-menu appears. Press EXIT to
return to the previous menu or press MENU to close all menus.
return to the previous menu or press MENU to close all menus.
or
button to select from the available languages: English, French, Spanish, German
and Italian.
or
button to change the orientation of the projected image. The RS-440 can be
installed on a ceiling or in a rear-screen configuration with one or more mirrors. There are
four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.
four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.
Keystone: Projector placement and other factors can cause geometric distortion in the
projected image. To correct this, select Keystone from the Installation menu. This
sub-menu provides the following options:
projected image. To correct this, select Keystone from the Installation menu. This
sub-menu provides the following options:
• V. Keystone/H. Keystone: To correct distortion resulting from the angle of projection,
select V. Keystone or H. Keystone from the Keystone menu and use the
or
button
to make the image rectangular. See Figure 4-6.
When you change a setting in the Installation menu, the change takes
effect immediately; you do not need to press ENTER afterwards.
(Press EXIT to return to the previous menu or MENU to exit.)
effect immediately; you do not need to press ENTER afterwards.
(Press EXIT to return to the previous menu or MENU to exit.)
Note
0
0
Runco recommends that the keystone feature not be used unless
absolutely necessary, as it may cause artifacts in the image.
absolutely necessary, as it may cause artifacts in the image.
1. The RS-440 keystone correction can compensate for up to
approximately 15 degrees of screen and/or projector tilt.
2. Straight lines or the edges of images may appear jagged while
adjusting the image.
Tip
Note