Runco rs-1100 用户指南
58
RS-900 and RS1100 Series Installation/Operation Manual
PRE
L
IMINAR
Y
VirtualWide
VWIDE
VirtualWide scales a 4:3
image NON-linearly (more
on the sides than in the
center) to fit a 16:9 screen.
image NON-linearly (more
on the sides than in the
center) to fit a 16:9 screen.
On a 2.35:1 screen, the
image is centered between
black bars on either side.
Cinema
CINEMA
Select Cinema to view 2.35
source material in its native
aspect ratio.
source material in its native
aspect ratio.
With a 16:9 screen and a
non-CineWide projector (no
anamorphic lens), the upper
and lower portions of the
screen are masked, but the
geometry of the active
image area is unchanged.
non-CineWide projector (no
anamorphic lens), the upper
and lower portions of the
screen are masked, but the
geometry of the active
image area is unchanged.
With a 2.35:1 screen and a
CineWide-equipped
projector, the video
processor scales the 2.35:1
image so that the active
image area fills the 16:9
chip surface, eliminating the
black bars. The secondary,
anamorphic lens then
restores the proper
geometry to the 2.35:1
image.
CineWide-equipped
projector, the video
processor scales the 2.35:1
image so that the active
image area fills the 16:9
chip surface, eliminating the
black bars. The secondary,
anamorphic lens then
restores the proper
geometry to the 2.35:1
image.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio
Remote
Control
Key
Description
4:3 Image on
16:9 Screen (Display)
4:3 Image on
2.35:1 Screen
with VirtualWide
4:3 Image on
16:9 Screen
with VirtualWide
2.35:1 Image on
16:9 Screen
(Cinema aspect ratio / no CineWide)
2.35:1 Image on
2.35:1 Screen
(Cinema aspect ratio / CineWide)