Garmin m5 安装指南

Before you can continue setting up your iQue M5, you 

should charge the battery for four full hours. 

1.  Locate the Sync cradle and the AC charger from 

the product packaging.

2.  Plug one end of the AC charger into the back 

of the Sync cradle. Plug the other end into a 

standard wall outlet.

 

NOTE: Do not connect the Sync cradle to your 

computer until you are instructed to do so in a 

later step!

3.  Insert the iQue M5 into the cradle by aligning the 

sides of the unit with the sides of the cradle. Then 

slide the unit gently down until it clicks into place.

After four hours have passed, turn on the iQue M5 by 

pressing the Power button, shown to the right. If the 

iQue M5 is charged completely, the LED light on the top 

of the unit should illuminate in green. If it is illuminated 

in orange, the unit needs to finish charging. When the 

unit is completely charged, follow the on-screen setup 

instructions.

Power button

Note: You may see a “Backup Battery 

Very Low” warning, even after you 

have charged the lithium-ion battery 

completely. This warning relates to 

the internal memory battery, which 

retains data when the main battery is 

removed. It may take up to two days 

to charge the internal memory battery 

completely. During this time, you can 

still use your iQue M5 out of  

the cradle.