GPX pd808 用户指南

Playing a DVD

1. Plug the unit into a standard 10V outlet, and turn the power on by moving the Power

Switch into the ON position. If the internal battery is charged, the unit does not have

to be plugged in.

. Press the Open Button and load a DVD into the unit’s DVD-Drive. Close the DVD

Door, and the DVD will start automatically.

. If the DVD doesn’t start, switch the unit to DVD Mode by pressing and holding the

DVD/SD/USB Function Button.

4.  Use the Directional Buttons to navigate through the DVD menu.
5.  Press the Play Button or Enter Button to make selections in the DVD menu.
6.  Press the Pause Button to pause a DVD during play.
7.  Press the Previous & Next Buttons to skip backwards and forwards through DVD

chapters.

8. Press the Menu Button to go back to the DVD’s main menu.

Programming a DVD

1. Insert a DVD into the unit. See the

“Playing a DVD” operation on page 16.

. After the DVD is inserted and loaded,

press the Program Button on the remote

control to display the Program Menu.

. Use the Directional Buttons to move

through the sixteen different program

slots.

4. Highlight a slot and enter a Title (T)

number and Chapter (C) number using

the Number Keypad on the remote

control. Repeat steps and 4 until

the desired titles and chapters are

programmed.

5. Highlight the “Play” button, on screen,

using the Directional Buttons, and press

the Enter Button to begin playing the

programmed titles and chapters.

T R K

1 8 / 1 8

0 1 : 1 4 : 2 0

PROG

PLAY

CLEAR

--:--

DISPLAY

SETUP

AUDIO

TITLE

TFT

ON/OFF

DISPLAY

SETUP

AUDIO

TITLE

TFT

ON/OFF

DVD

PREV.

DVD/SD/USB

PLAY/PAUSE

VOLUME

OPEN