Aigo dc-t1200 用户指南
150mm+-2
105
mm+-2
105
mm+-2
6
7
Getting Ready
Charging The Battery
The battery is not charged when the camera is shipped.
Charge the battery before use.
Charge the battery before use.
A new battery should be charged for at least 2 hours.
Getting Ready
Loading The Battery
Inserting Or Removing A Memory Card
Button & Function
Turn On Or Off The Camera
By pressing again the Power Button can turn off the camera.
By pressing the Power Button can turn on the camera
1. Power off the camera.
2. Slide out Battery Cover to open it.
3. Following the polarity indications and load the battery.
4. Close the Battery Cover.
2. Slide out Battery Cover to open it.
3. Following the polarity indications and load the battery.
4. Close the Battery Cover.
The below symbols
are the indication
of
on the TFT LCD Monitor
the battery status.
(
):Battery power is full.
(
):Battery power is half drained. Have new a battery ready.
(
):Battery power is drained. Replace with a new batter .
y
The battery may run out if the battery is kept inside the camera
for a long time without using. Please remove the battery when
the camera is not in use.
for a long time without using. Please remove the battery when
the camera is not in use.
(
):Battery charging
Charging Procedure
1. Insert the Adaptor Jack to the DC IN socket by the
1. Insert the Adaptor Jack to the DC IN socket by the
polarity indications.
2. Connect the Adaptor to the electrical outlet.
3. The LED will light up in orange color whenin charging.
4. The charging is completed when the LED turns green.
5. Remove the Adaptor Jack when the charging is completed.
3. The LED will light up in orange color whenin charging.
4. The charging is completed when the LED turns green.
5. Remove the Adaptor Jack when the charging is completed.
1. Power off the camera.
2. Open the Battery / Memory Card Cover.
3. Insert the memory card into the card slot and press it
2. Open the Battery / Memory Card Cover.
3. Insert the memory card into the card slot and press it
down until a click sound happens. (Please press the memory
card again to get it out once a click sound happens.)
card again to get it out once a click sound happens.)
4. Close the Memory Card Cover.
Formatting a brand new
card is strongly
recommended for first use.
memory
The image(s) can be stored either in built-in flash memory
or in memory card. When the memory card is inserted, the
images will be stored in the memory card rather than the
built-in flash memory. On the other hand, the images will be
stored in the built-in flash memory when a memory card is
not inserted.
or in memory card. When the memory card is inserted, the
images will be stored in the memory card rather than the
built-in flash memory. On the other hand, the images will be
stored in the built-in flash memory when a memory card is
not inserted.
Power Button
1. By pressing the Power Button can turn on the camera.
2. By pressing again the Power Button can turn off the
2. By pressing again the Power Button can turn off the
camera.
3. If there is no operation during the specified time,
the camera will power off automatically to save
battery life.
battery life.
Press the shutter button half way to do the focusing and
then press the shutter button fully down to capture an image.
Shutter
The battery may not work normally under 0 C or over 40 C .
It's normal that the temperature of the camera rises after
used for a long period.
It's normal that the temperature of the camera rises after
used for a long period.
Do not support Memory Card under 128MB
When using 8G SD Card, the single file is up to 4G.
When using 8G SD Card, the single file is up to 4G.
Playback result will be affected by different brand of memory
card. Various delays might occur during playback HD file.
card. Various delays might occur during playback HD file.
Kindly note: