NorthStar 961x 用户手册
Chapter 4 - Understanding the Chart Screen
Page 4-20
961 Operations and Reference Manual Rev. D
Adding the cursor position to the end of your trip
To add the cursor position to the end of your trip:
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen, then press the CURSOR
menu key.
menu key.
The SELECTED CURSOR POSITION dialog box
appears.
appears.
2. If desired, use the KEYPAD to change the coordinates; if
not, press the ADD TO END OF TRIP key (or press the
CANCEL
CANCEL
key to cancel).
The 961 adds a waypoint called COORD to the end of the
trip, and returns to the CHART screen. The future trip leg
is displayed in light blue on the CHART screen. Nothing is
erased from the trip. If you were already past the end of
your trip, you’ll immediately begin navigating to this new
position as the active waypoint.
trip, and returns to the CHART screen. The future trip leg
is displayed in light blue on the CHART screen. Nothing is
erased from the trip. If you were already past the end of
your trip, you’ll immediately begin navigating to this new
position as the active waypoint.
Making a new waypoint
To store a new, named waypoint at the chart location desig-
nated by the cursor:
nated by the cursor:
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen, then press the CURSOR
menu key.
menu key.
The SELECTED CURSOR POSITION dialog box
appears.
appears.
2. If desired, use the KEYPAD to change the coordinates;
next, press the STORE AS WAYPT/ROUTE key.
The STORE AS A WAYPOINT dialog box appears, sup-
plying a default waypoint name.
plying a default waypoint name.