Garmin 530 用户指南
97
97
6 - wpt pages
NOTE: Not all approaches in the database are approved for GPS use. As you select an approach, a
“
“
G
P
S
” designation to the right of the procedure name indicates the procedure can be fl own using
the GPS receiver. Some procedures do not have this designation, meaning the GPS receiver may be
used for supplemental navigation guidance only. ILS approaches, for example, must be fl own by
tuning the VLOC receiver to the proper frequency and coupling the VLOC receiver to the external
CDI (or HSI).
used for supplemental navigation guidance only. ILS approaches, for example, must be fl own by
tuning the VLOC receiver to the proper frequency and coupling the VLOC receiver to the external
CDI (or HSI).
Airport Approach Page Options
The following options are available for the Airport Approach Page, by pressing the MENU key:
Load into Active FPL? allows you to load the selected approach into the active fl ight plan —
without activating it. This performs the same op eration as selecting “Load?” from the Procedures
Page “Select Approach?” option. See page 61.
without activating it. This performs the same op eration as selecting “Load?” from the Procedures
Page “Select Approach?” option. See page 61.
To load an approach from the Airport Approach Page:
1. Select the desired approach and transition using the steps outlined on page 96.
2. Press MENU to display the Airport Approach Page Options.
3. Rotate the large right knob to highlight “Load into Active FPL?” and press ENT.
4. The Active Flight Plan Page appears. Press FPL to return to the Airport Approach Page.
Load and Activate? allows you to load the selected approach into the active fl ight plan and activate navi-
gation guidance to the approach tran sition. See page 63.
gation guidance to the approach tran sition. See page 63.
To load and activate an approach from the Airport Approach Page, follow the steps above,
but select “Load and Activate?” in step #3.
but select “Load and Activate?” in step #3.
STEP 2 & 3: From the Airport Approach Page,
press MENU to display an options list. Select
“Load into Active FPL?” to load the approach for
later use.
press MENU to display an options list. Select
“Load into Active FPL?” to load the approach for
later use.
Airport Approach Options
)
Select “Load and Activate?” to immediately begin
using the approach waypoints for navigation
guidance.
using the approach waypoints for navigation
guidance.
61-112.indd 97
4/11/2003, 8:53:01 AM