Garmin 530 用户指南
133
133
9 - aux pages
STEP 2: Press MENU and use the options window
to select the other leg mode: Point-to-Point or
Flight Plan.
to select the other leg mode: Point-to-Point or
Flight Plan.
Flight Planning
Flight Planning Page: Trip Planning
To perform trip planning operations:
1. Select “Trip Planning” from the Flight Planning Page, using the steps described on page 130.
2. The current trip planning “leg mode” is displayed at the top of the page: “POINT TO POINT” or “FPL LEG” (for
a fl ight plan leg). To change the leg mode, press MENU to display an options window for the other leg mode,
then press ENT to accept the other leg mode.
then press ENT to accept the other leg mode.
3a. For direct-to planning, verify that the “from” waypoint fi eld indicates “P.POS” (present position). If necessary,
press CLR to display “P.POS”. Press ENT and the fl ashing cursor moves to the “to” waypoint fi eld. Rotate
the small and large right knobs to enter the identifi er of the “to” waypoint and press ENT to accept the
waypoint. OR,
the small and large right knobs to enter the identifi er of the “to” waypoint and press ENT to accept the
waypoint. OR,
3b. For point-to-point trip planning, rotate the small and large right knobs to enter the identifi er of the “from”
waypoint. Once the waypoint’s identifi er is entered, press ENT to accept the waypoint. The fl ashing cursor
moves to the “to” waypoint. Again, rotate the small and large right knobs to enter the identifi er of the
“to” waypoint and press ENT to accept the waypoint. OR,
moves to the “to” waypoint. Again, rotate the small and large right knobs to enter the identifi er of the
“to” waypoint and press ENT to accept the waypoint. OR,
3c. For “fl ight plan leg” trip planning, rotate the small right knob to select the de sired fl ight plan (already
stored in memory), by number. Rotate the large right knob to highlight the “LEG” fi eld and rotate the small
right knob to select the desired leg of the fl ight plan, or select “Cum” to apply trip planning calculations to
the entire fl ight plan.
right knob to select the desired leg of the fl ight plan, or select “Cum” to apply trip planning calculations to
the entire fl ight plan.
4. Rotate the large right knob to highlight the departure time (DEP TIME) fi eld.
5. Use the small and large right knobs to enter the departure time. Press ENT when fi nished. (Departure time
may be entered in local or UTC time, depending upon unit settings. (See page 151.)
6. If necessary, use the small and large right knobs to enter the departure date. Press ENT when fi nished.
7. The fl ashing cursor moves to the ground speed (GS) fi eld. Use the small and large right knobs to override
the current ground speed (and enter a planning fi gure). Press ENT when fi nished. (To return ground speed
reading to current conditions, highlight the ground speed [GS] fi eld, press CLR, then press ENT.)
reading to current conditions, highlight the ground speed [GS] fi eld, press CLR, then press ENT.)
8. With all variables entered, the following information is provided:
• DTK — Desired track, or desired course
• DIS — Desired track, or desired course
• ETE — Estimated time en route
• ESA — En-route safe altitude
• ETA — Estimated time of arrival
• Sunrise/Sunset times at the destination
STEP 6: The current time and date are au to mat i-
cal ly offered for depature time and date. To accept
either automatic selection, simply press ENT when
the selection is highlighted.
cal ly offered for depature time and date. To accept
either automatic selection, simply press ENT when
the selection is highlighted.
113-188.indd 133
4/11/2003, 9:05:53 AM