Garmin 530 用户指南

141

9 - aux pages

Utility Page

Utility Page: Flight Timers

To view, use or reset the generic timer:

1. Select “Flight Timers” from the Utility Page, using the steps described on page 138.

2. The ﬂ ashing cursor highlights “Start?”. To start the generic timer, press ENT. (You typically begin with this step

for count up timers. However, for count down timers, you may wish to enter a count direction and time before
starting the timer. See below.)

3. To change the count direction, rotate the large right knob to highlight the count direction ﬁ eld: “Down” or

“Up”. Rotate the small right knob to select the desired count direction. Press ENT when ﬁ nished.

4. For a count down timer, rotate the large right knob to highlight the time ﬁ eld. Use the small and large

right knobs to enter the count down time — in hours, minutes and seconds. Press ENT when ﬁ nished.

5. To stop the generic timer, rotate the large right knob to highlight “Stop? and press ENT.

6. To reset the generic timer, rotate the large right knob to highlight the time ﬁ eld. Press CLR, followed by ENT.

To record or reset the departure time:

1. Select “Flight Timers” from the Utility Page, using the steps described on page 138.

2. Rotate the large right knob to highlight the reset mode ﬁ eld, under “Departure Time”. (The reset mode ﬁ eld

indicates “Pwr-on” or “GS>30kt”.)

3. Rotate the small right knob to select the desired reset mode. (“Pwr-on” records a departure time when the

GNS 530 is turned on. “GS>30kt” records a departure time once the GPS-computed ground speed exceeds 30
knots.)

4. Press ENT when ﬁ nished.

5. To reset the departure time, rotate the large right knob to highlight “Reset?” and press ENT.

STEP 3 (top): Rotate the small right knob to
select a count “Down” or count “Up” timer.

STEP 3 (bottom): The GNS 530 can be conﬁ gured
to record the departure time when the unit is
powered on or when your ground speed exceeds
30 knots.

113-188.indd 141

4/11/2003, 9:06:03 AM