Garmin 530 用户指南
144
144
9 - aux pages
Setup Page
The Setup Page provides access (via a list of “menu options”) to airspace alarms, CDI scale ad justments, an
arrival alarm, units of measure settings, position formats, map datums, settings for local or UTC time display,
display adjustments, nearest airport search parameters, data fi eld confi gurations and COM trans ceiver chan-
nel spacing. When a menu option is selected, the cor re sponding page appears pro viding access to the various
unit settings.
display adjustments, nearest airport search parameters, data fi eld confi gurations and COM trans ceiver chan-
nel spacing. When a menu option is selected, the cor re sponding page appears pro viding access to the various
unit settings.
To select a menu option from the Setup Page:
1. Press the small right knob momentarily, to activate the fl ashing cursor.
2. Rotate the large right knob to select the desired menu option, and press ENT.
The following menu options are available:
CDI / Alarms — allows you to defi ne the scale for the GNS 530’s on-screen course de viation in dicator.
The scale values represent full scale defl ection for the CDI to either side. The default setting is “5.0 nm”.
At this setting, the CDI scale is set to 5.0 nautical miles during the “en-route” phase of fl ight. Within 30
nm of your destination airport, the CDI scale gradually ramps down to 1.0 nm (terminal area). Likewise,
when leaving your departure airport the CDI scale is set to 1.0 nm and gradually ramps UP to 5 nm
beyond 30 nm (from the departure airport). During approach operations the CDI scale gradually ramps
down even further, to 0.3 nm. This transition normally occurs within 2.0 nm of the fi nal approach fi x
(FAF).
CDI / Alarms — allows you to defi ne the scale for the GNS 530’s on-screen course de viation in dicator.
The scale values represent full scale defl ection for the CDI to either side. The default setting is “5.0 nm”.
At this setting, the CDI scale is set to 5.0 nautical miles during the “en-route” phase of fl ight. Within 30
nm of your destination airport, the CDI scale gradually ramps down to 1.0 nm (terminal area). Likewise,
when leaving your departure airport the CDI scale is set to 1.0 nm and gradually ramps UP to 5 nm
beyond 30 nm (from the departure airport). During approach operations the CDI scale gradually ramps
down even further, to 0.3 nm. This transition normally occurs within 2.0 nm of the fi nal approach fi x
(FAF).
Setup Page
STEP 2: From the Setup Page, highlight the desired
menu option and press ENT...
menu option and press ENT...
Menu Option: to
select, highlight
with cursor and
press ENT.
Third Page
in AUX Group
...to display the corresponding option page (e.g.
Units / Position Page).
Units / Position Page).
113-188.indd 144
4/11/2003, 9:06:07 AM