Garmin 530 用户指南
60
4 - FLIGHT PLANS
On page 55 the “Activate Leg?” option is discussed, which allows you to specify which leg of the fl ight
plan is currently used for navigation guidance. A shortcut also exists for this operation, using the direct-to
key.
key.
To activate a specifi c leg of the active fl ight plan:
1. Press the small right knob to activate the cursor and rotate the large right knob to highlight the desired
des ti na tion waypoint.
2. Press direct-to twice to display an “Activate Leg” confi rmation window.
3. With “Activate?” highlighted, press ENT.
When using instrument procedures, this feature can be used not only to activate a specifi c point-to-point
leg, but to also activate a departure, an arrival, the procedure turn portion of an approach, follow a DME arc
or activate a holding pattern.
or activate a holding pattern.
Any approach, departure or arrival can be reviewed on the appropriate airport page in the WPT page
group. See page 88.
To review a procedure while viewing a fl ight plan page:
1. With the fl ight plan page displayed, press the small right knob to activate the cursor.
2. Rotage the large right knob to highlight the procedure header and press ENT to select the WPT page group.
From the Active Flight Plan Page, use the direct-to
key (press twice) to activate a highlighted route
leg...
key (press twice) to activate a highlighted route
leg...
Flight Plan Leg Selection
...including any portion of an instrument pro-
cedure, such as a procedure turn, DME arc or
holding pattern.
cedure, such as a procedure turn, DME arc or
holding pattern.
i-60.indd 60
4/11/2003, 8:56:56 AM