Garmin 376c 业主指南
Turning On the GPSMAP 376C
The first time you turn on your new GPSMAP 376C, the GPS
receiver must collect satellite data and establish its current location.
To ensure proper initialization, the GPSMAP 376C is shipped from
the factory in AutoLocate mode, which allows the receiver to “find
itself” anywhere in the world. Before you turn on the unit to start
initialization, be sure that the antenna is rotated up as shown on
page
, and it has a clear and unobstructed view of the sky to receive
satellite signals.
To turn the GPSMAP 376C on and off:
1. Press and hold the
POWER key. When the unit turns on, a
tone sounds and the Warning Page appears.
Warning Page
2. Read the warning, and then press
ENTER to continue.
3. To turn off the GPSMAP 376C, press and hold the
POWER
key again.
Adjusting the Backlight and Volume
You can adjust the backlight to see the display better. If you are
using the optional External Speaker with 12/24-Volt Adapter Cable
with the GPSMAP 376C or you have headphones plugged into the
headphone jack, you can adjust the volume level of the audio output.
To adjust the backlight level or volume:
1. Press and quickly release the
POWER key.
2. Press up on the
ROCKER to increase the brightness or
press down to decrease. Press right to raise the volume or
left to lower.
3. Press
ENTER or QUIT to close the Backlight/Volume
adjustment window.
4. Press
MENU to view the options menu.
Backlight
adjustment slider
Volume
adjustment slider
Battery time remaining and power source indicator
GPSMAP 376C Owner’s Manual
3
G
ETTING
S
TARTED
>
T
URNING
O
N
THE
GPSMAP 376C