Garmin 785 快速安装指南

1.  Clean and dry your windshield and the 

suction cup with a lint-free cloth. Remove 

the clear plastic from the suction cup. 

Place the suction cup on the windshield. 

2.  Plug the vehicle power cable into the 

power connector on the right side of the 

cradle. 

3.  Snap the cradle onto the suction cup 

arm.

4.  Flip the lever back, toward the 

windshield. 

5.  Fit the bottom of your nüvi into the 

cradle.

6.  Tilt the nüvi back until it snaps into place.

7.  Plug the other end of the vehicle power 

cable into a power outlet in your vehicle. 

Your unit should turn on automatically if it 

is plugged in and your vehicle is running.

To turn on your nüvi, slide the   

 

key to the left. Follow the on-screen 

instructions. 

Go outdoors to an open area, out of garages, 

and away from tall buildings. Stop your 

vehicle, and turn on the nüvi. Acquiring 

satellite signals may take a few minutes. 
The 

 bars indicate GPS satellite 

strength. When one bar is green, the nüvi 

has acquired satellite signals. Now you can 

select a destination and navigate to it.