Sherwood rd-7108 用户指南
7
ENGLISHENGLISH
FRONT
SPEAKERS
(6 )
SURROUND
SPEAKERS
(6 )
CENTER
SPEAKER
(6 )
SURROUND
BACK
(6 )
Front left
Surround
left
Front right
Surround
right
(Front)
Center
Center
Surround
back
7. CONNECTING SPEAKERS
• Be sure to connect speakers firmly and correctly
according to the channel(left and right) and the
polarity(+ and -). If the connections are faulty, no
sound will be heard from the speakers, and if the
polarity of the speaker connection is incorrect, the
sound will be unnatural and lack bass.
polarity(+ and -). If the connections are faulty, no
sound will be heard from the speakers, and if the
polarity of the speaker connection is incorrect, the
sound will be unnatural and lack bass.
• For installing the speakers, refer to “Speaker
placement” on page 16.
• After installing the speakers, first adjust the speaker
settings according to your environment and speaker
layout.(For details, refer to “Adjusting the speaker
settings” on page 17.)
layout.(For details, refer to “Adjusting the speaker
settings” on page 17.)
Caution :
• Be sure to use the speakers with the impedance of 6
ohms or above.
• Do not let the bare speaker wires touch each other or
any metal part of this unit. This could damage this unit
and/or the speakers.
and/or the speakers.
8. SWITCHED AC OUTLET
• This outlet is switched on(power-on mode) and
off(standby mode) according to power control as
follows(Maximum total capacity is 1 A, 100 W).
follows(Maximum total capacity is 1 A, 100 W).
Standby mode - Switched AC outlet off
Power-on mode - Switched AC outlet on
Power-on mode - Switched AC outlet on
9. AC INPUT CORD
• Plug this cord into a wall AC outlet.
SWITCHED
120V~60Hz
120V~60Hz
100W 1A MAX
AC OUTLET
AC INPUT
120V~60Hz
2.5A