Coby dvd-207 发行公告

Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV 
manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box, 
contact your cable provider or the cable manufacture.  Once your TV is turned to the correct video line, you 
should see the “COBY” logo. 

 

 
ISSUE #2 NO SOUND  

Make sure the Red and White wire is connected into the L-CH & R-CH.

Make sure the Red and White wire is connected into your TV “AUDIO IN”. 
 

You cannot connect the DVD player through your VCR, TV/VCR combo, Cable or Satellite. 
If you cannot connect directly to the TV via a yellow video input, then you will need to purchase an RF 
Modulator and a four-foot coaxial cable at your local electronics store. 
 

Make sure the Yellow video wire is connected into the Video connection on the DVD player and on the TV. 
 

The DVD has been set to the incorrect broadcast system.  Follow the below procedure on resetting the 
player back to the default setting

 
RESET THE DVD PLAYER BACK TO THE DEFAULT SETTING 
Make sure you do not have a disk in the tray.  
 

1) Press the “Setup” button. 
2) On the “Down” arrow, press it three times. 
3) On the “Right’ arrow, press it once. 
4) On the “Down” arrow, press it three times. 
5) On the “Right” arrow, press it once, then press “Enter”. 
6) Press the Setup button. 

 

*The default setting will take affect as soon as you press the setup button (step 6). 
 
If you are still having difficulty setting up your new DVD player, please contact Customer 
Service or Technical Support, Monday-Friday 8:00 AM – 11:00 PM EST, Saturday and 
Sunday 9:00 AM – 11:00 PM EST. You can also reach us online at