Coby dvd-505 发行公告

Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV 
manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box, 
contact your cable provider or the cable manufacture.  Once your TV is turned to the correct video line, you 
should see the “COBY” logo. 

 

 
ISSUE #2 ROLLING, COLORLESS SCREEN 

Make sure the Yellow video wire is connected into the Video connection on the DVD player and on the TV 
 

The DVD has been set to the incorrect broadcast system.  Press the TV.SYS button on the remote to select 
the correct broadcast system (make sure you do not have a disk in the tray while pressing the TV.SYS 
button). NTSC is for the United States TV broadcast system.

You cannot connect the DVD through your VCR, TV/VCR combo, Cable or Satellite. 
If you cannot connect directly to the TV via a yellow video input, then you will need to purchase an RF 
Modulator and a four-foot coaxial wire at your local electronics store. 
 

The DVD player may be set to Progressive Scan Mode. You will need to change the Video mode from 
Progressive Scan to Composite. 

Make sure you DO NOT have a disk in the DVD tray. Follow the 

below procedure.

 

 

****RESET THE DVD PLAYER BACK TO THE DEFAULT SETTING*** 
  

1)  Open the DVD tray. 
2)  Press the “Setup” button. 
3)  On the “Down” arrow, press it three times. 
4)  On the “Right’ arrow, press it once. 
5)  On the “Down” arrow, press it three times 
6)  On the “Right” arrow, press it once, then press “Play/Sel” button. 
7)  Press the Setup button to exit. 

 

*The default setting will take affect as soon as you press the setup button (step 6). 
 
 
If you are still having difficulty setting up your new DVD player, please contact Customer 
Service or Technical Support, Monday-Friday 8:00 AM – 11:00 PM EST, Saturday and 
Sunday 9:00 AM – 11:00 PM EST. You can also reach us online at