Viking Range vgbq0302t 安装指导
T
To
o cco
on
nvve
errtt tth
he
e rro
ottiissssiie
erre
e iin
nffrraarre
ed
d b
bu
urrn
ne
err::
1. Remove the back cover from
the unit to expose the orfice
hood to the infrared burner.
hood to the infrared burner.
2. Remove the gas orifice hood
located on the grill.
3. Replace with the gas orifice
hood supplied in the
conversion kit.
conversion kit.
4. Replace the back cover
Orifice hood
Back
Cover
Cover
Landing ledge
Grill Burner /
Side Burner
Orifice hoods
Side Burner
Orifice hoods
R
Re
eaarr ssiid
de
e o
off
cco
on
nttrro
oll
p
paan
ne
ell
Smoker Burner
Orifice hood
Orifice hood
T
To
o cco
on
nvve
errtt g
grriillll b
bu
urrn
ne
errss,, ssiid
de
e b
bu
urrn
ne
err aan
nd
d ssm
mo
okke
err b
bu
urrn
ne
err::
1. Remove all grates, flavor generators and stainless steel
burners from the unit.
2. Look into the burner box back toward the control panel in
order to located the orifice hoods. Remove the gas orifice
hoods located on the grill burner valves.
hoods located on the grill burner valves.
3. Replace the orifice hoods with the correct gas orifice hoods
supplied in the conversion kit. (See chart)
4. Replace the stainless steel burners, flavor generators and
grates.
N
NO
OT
TE
E::
For installation in areas with altitudes greater than 2000 feet, the orifices must be derated at 4% for every
1000 feet above 2000 feet.
1000 feet above 2000 feet.
2
Natural
LP/Propane
Orifice Hood Orifice Hood
Infrared
(2) - #48
(2) - #57
Burner
Natural
LP/Propane
Orifice Hood
Orifice Hood
Grill
Burners
Burners
(4) - 40
(4) - #54
Smoker
Burners
Burners
(2) - #51
(2) - #62
Side
Burners
Burners
(2) - #49
(2) - #57
VGBQ “T” SERIES CONVERSIONS
T
To
o cch
he
ecckk LLP
P//P
Prro
op
paan
ne
e tto
o N
Naattu
urraall C
Co
on
nvve
errssiio
on
n o
off tth
he
e rro
ottiissssiie
erre
e
iin
nffrraarre
ed
d b
bu
urrn
ne
err::
Ignite the rotissere burner and set it to low. If the burner will not
hold a flame, it will be necessary to adjust the low setting. Remove
the control panel to expose the rotissiere safety valve. Using a small
flat head screwdriver turn the adjustment screw counterclockwse.
Visually check the flame. When the burner is able to hold a flame
on the low setting, the setting is complete. Replace the control
panel.
hold a flame, it will be necessary to adjust the low setting. Remove
the control panel to expose the rotissiere safety valve. Using a small
flat head screwdriver turn the adjustment screw counterclockwse.
Visually check the flame. When the burner is able to hold a flame
on the low setting, the setting is complete. Replace the control
panel.
adjustment
screw
screw