Viking Range vcfb304 安装指南
61
Service & Registration
Only authorized replacement parts may be
used in performing service on the appliance.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be
referred to a qualified technician.
used in performing service on the appliance.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be
referred to a qualified technician.
Record the following information indicated
below. You will need it if service is ever required.
The serial number and model number for your
appliance are located on the identification plate
mounted behind the top light.
below. You will need it if service is ever required.
The serial number and model number for your
appliance are located on the identification plate
mounted behind the top light.
Model number
_________________________________________
Serial number
_________________________________________
Date of purchase
_________________________________________
Date installed
_________________________________________
Dealer's name
_________________________________________
Address
_________________________________________
Verify Operations
60
Control Panels
1. Press “Display On” or “Activate Controls” pad.
2. Verify unit is not in Sabbath Mode.
2. Verify unit is not in Sabbath Mode.
If in Sabbath Mode:
A. The Sabbath Mode will disable the interior lights, display (except three blue squares) and alarm.
A. The Sabbath Mode will disable the interior lights, display (except three blue squares) and alarm.
(See picture below for visual indication of Sabbath Mode.)
To exit the Sabbath Mode:
B. Press and Hold “Display On” or “Activate Controls” and then “Display Off” for 3 seconds.
B. Press and Hold “Display On” or “Activate Controls” and then “Display Off” for 3 seconds.
(The control will beep three times to alert the user the Sabbath Mode has been exited.)
3. Verify unit is not in Showroom Mode.
If in Showroom Mode:
A. The Showroom Mode will disable the refrigerator system but all other functions are normal.
A. The Showroom Mode will disable the refrigerator system but all other functions are normal.
These include lights and control. (See picture below for visual indication of Showroom Mode.)
To exit Showroom Mode:
B. Press and Hold “Display On” or “Activate Controls”; while holding, press and hold “Higher
B. Press and Hold “Display On” or “Activate Controls”; while holding, press and hold “Higher
Temp” and “Alarm Off” together. (The control will beep three times to alert the user that
Showroom Mode has been exited.)
Showroom Mode has been exited.)
4. Press “Max Frz” and “Display Off” at the same time and hold until beeps (force start compressor).
5. All models need to be set at the fifth bar for Refrigerator and Freezer - factory setting.
5. All models need to be set at the fifth bar for Refrigerator and Freezer - factory setting.
ACTIVATE
CONTROLS
REF
TEMP
HIGHER
TEMP
LOWER
TEMP
HIDDEN
BUTTON
BUTTON
HIDDEN
BUTTON
BUTTON
MAX FRZ
MAX
REF
ALARM
OFF
DISPLAY
OFF
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
COLDEST
. . . . . . . . . . . . . .
DOOR OPEN
All Refrigerator
FRZ
TEMP
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
MAX
FRZ
COLDEST
. . . . . . . . . . .
DOOR OPEN
ACTIVATE
CONTROLS
FRZ
TEMP
HIGHER
TEMP
LOWER
TEMP
HIDDEN
BUTTON
BUTTON
HIDDEN
BUTTON
BUTTON
MAX REF
MAX
FRZ
ALARM
OFF
DISPLAY
OFF
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
COLDEST
. . . . . . . . . . . . . .
DOOR OPEN
All Freezer
FRZ
TEMP
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
MAX
FRZ
COLDEST
. . . . . . . . . . .
DOOR OPEN