Viking Range veos100t 用户手册
2
BUILT-IN INSTALLATION
Select Location
The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of
direct sunlight and away from heat sources. Units with fan cooled condensers can be built-in.
direct sunlight and away from heat sources. Units with fan cooled condensers can be built-in.
Unit should be operated in a properly ventilated area with ambient temperatures above 40oF (4.4oC) and below
110oF (43oC). Installation should be such that the cabinet can be moved for servicing if necessary.
Cabinet Clearance
Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any obstructions.
The adjacent cabinets and countertop can be built around the unit as long as no top trim or counter top is installed
lower than the top of the hinge.
The adjacent cabinets and countertop can be built around the unit as long as no top trim or counter top is installed
lower than the top of the hinge.
ELECTRICAL CONNECTION
Electrical Requirements
A 115 volt, 60 Hz, AC only 15 amp fused electrical supply is required. (A
time delay fuse or circuit breaker is recommended.) It is recommended
that a separate circuit, serving only this appliance, be provided.
A 115 volt, 60 Hz, AC only 15 amp fused electrical supply is required. (A
time delay fuse or circuit breaker is recommended.) It is recommended
that a separate circuit, serving only this appliance, be provided.
•ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.
•DO NOT UNDER ANY CIRCUMSTANCES REMOVE THE POWER
•DO NOT UNDER ANY CIRCUMSTANCES REMOVE THE POWER
SUPPLY CORD GROUND PLUG.
•DO NOT USE AN EXTENSION CORD.
Recommended Grounding Methods
For your personal safety, this unit must be grounded. This appliance is equipped with a
power supply cord having a 3-prong grounding plug. To minimize possible shock hazard,
the cord must be plugged into a mating 3-prong grounding type wall receptacle
grounded in accordance with the National Electrical Code and local codes and ordinances.
If the circuit does not have a grounding type receptacle, it is the responsibility and
obligation of the customer to exchange the existing receptacle in accordance with the
National Electrical Code and applicable local codes and ordinances. The third ground
plug SHOULD NOT, under any circumstances, be cut or removed. All UL listed
refrigerated products are equipped with this type of plug.
For your personal safety, this unit must be grounded. This appliance is equipped with a
power supply cord having a 3-prong grounding plug. To minimize possible shock hazard,
the cord must be plugged into a mating 3-prong grounding type wall receptacle
grounded in accordance with the National Electrical Code and local codes and ordinances.
If the circuit does not have a grounding type receptacle, it is the responsibility and
obligation of the customer to exchange the existing receptacle in accordance with the
National Electrical Code and applicable local codes and ordinances. The third ground
plug SHOULD NOT, under any circumstances, be cut or removed. All UL listed
refrigerated products are equipped with this type of plug.
Power Supply
with 3-prong
grounding plug
Grounding type wall
receptacle
receptacle
Suffocation Hazard
Remove doors from your old
refrigerator.
Failure to do so can result in
child entrapment, which can
cause death or brain damage
refrigerator.
Failure to do so can result in
child entrapment, which can
cause death or brain damage
Electrical Shock Hazard
Do not splash or spray water
from a hose on a refrigerated
unit. Doing so may cause an
electrical shock which may
result in severe injury or death.
from a hose on a refrigerated
unit. Doing so may cause an
electrical shock which may
result in severe injury or death.
IIM
MP
PO
OR
RT
TA
AN
NT
T:: Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still dangerous, even
if they will sit for “just a few days.” If you are getting rid of your
refrigeration product, please follow the instructions below to help
prevent accidents.
if they will sit for “just a few days.” If you are getting rid of your
refrigeration product, please follow the instructions below to help
prevent accidents.
BEFORE YOU THROW AWAY YOUR OLD REFRIGERATION
PRODUCT:
•Take off the doors.
•Leave the shelves in place so that children may not easily climb inside.
PRODUCT:
•Take off the doors.
•Leave the shelves in place so that children may not easily climb inside.
Proper Disposal of Your Old Refrigeration Product