Videolarm sm7c12n-3 用户指南

- 3 -

!

!

                           (SM7CS-9)
               Power 24Vac , Class 2 Only 

Total Power: 72 watts

Accessories (Heater/Blower): 52 watts 

Heater: 50 watts 
Blower: 2 watt

Camera Power: 20 watts

Be sure the bracket is properly and securely mounted 
to a supporting structure capable of rigidly holding 
the weight of the entire unit.

Tools Required:  .100" Flat Head Screwdriver
                             Phillips Head Screwdriver

Outdoor vandal resistant surface mount ptz IP camera system 
that can be mount facing down or facing towards the sky. 
23x zoom Day & night camera. MPEG-4 & MJPEG video 
compression format, Full D1. Clear dome, w/24Vac input, 
heater/blower

1.  Remove content from all boxes. Contents should include:

Do not
assembled and installed.

Pan/Tilt unit is boxed separately and must be installed into the 
housing. Remove unit from box, slide the (2) pins on the pan/tilt 
base through the rubber grommets as shown below. Unit will 
not align unless base is fully pushed into place. Lower other end 
of base and secure with captive fastener.

!

                           (SM7C12S-9)
               Power 12VDC , Class 2 Only 

Total Power: 42 watts

Accessories (Heater/Blower): 22 watts 

Heater: 20 watts 
Blower: 2 watt

Camera Power: 20 watts