Vitek vt-ptz10 用户指南
VT-PTZ Series
42
6)
Select from the three available
speeds, F (Fast), M (Medium) and S
(Slow) for the camera movement.
speeds, F (Fast), M (Medium) and S
(Slow) for the camera movement.
The default is F.
7) Select the dwell time for the PRESET
to stay at the programmed location.
The default is 3 seconds. Available
dwell time is from 1 to 99 seconds.
The default is 3 seconds. Available
dwell time is from 1 to 99 seconds.
8) Repeat steps 3 through 7 for additional PRESET programs to be run. Please
note that the preset programs must be preprogrammed before they can be
included in the TOUR.
included in the TOUR.
3.1.5.2 Programming a Tour with Pattern Programs.
1) Select an empty location.
2) Press the PATTERN button. When
the PATTERN button is pressed, the
first program is entered automatically.
first program is entered automatically.