Vitek vt-ptz10 用户指南
VT-PTZ Series
71
3.5 SETUP
Setup allows customization of the mechanics of the Xpress Dome. The options consist
of FLIP, SPEED, PANNING RANGE, TILT OVER ANGLE, CALIBRATION, FACTORY
DEFAULT, INITIALIZE DATA, ERASE DATA and SYSTEM INFORMATION.
3.5.1 STABILIZER (VT-PTZ26 ONLY)
The stabilizer digitally steadies the camera to
provide a smoother picture when the Xpress
Dome is installed in an unstable environment (e.g.
on top of a skyscraper, windy environment, and
such). The default is OFF.
3.5.2 FLIP
The Flip is a useful tool to follow an object or a
human being passing directly beneath the Xpress
Dome. For example, when the Flip option is set
to ON, the camera will move from 0 degree to 90
degrees position vertically and continue to move
to 180 degrees without interruption. The picture
will be digitally corrected at 90 degrees to provide
a reverse image, which in fact will be the normal
view for the flip side. The default is ON.
human being passing directly beneath the Xpress
Dome. For example, when the Flip option is set
to ON, the camera will move from 0 degree to 90
degrees position vertically and continue to move
to 180 degrees without interruption. The picture
will be digitally corrected at 90 degrees to provide
a reverse image, which in fact will be the normal
view for the flip side. The default is ON.