Vitek vt-ptz10 用户指南

VT-PTZ Series 

78 

3.5.6.1 Origin Reset 
 
Origin Reset reverts the point of origin, or the point of reference back to when the 
Xpress Dome was first powered on.   
 

1)  Highlight Origin Reset and move the 

joystick to the right. 

 
 
 
 
 
 

 

2) Press the ENTER or the MENU button 

to confirm Origin Reset, or press the 
ESC button to exit without resetting the 
Origin.   

 
 
 
 
 

3)  When the ENTER button is pressed, the 

Xpress Dome will reset and reinitialize 
just as when the Xpress Dome was first 
powered on.  The point of origin will be 
reset back to when the Xpress dome 
was powered on.   

 
 

 
3.5.6.2 Origin Position Move 
 
If the Xpress Dome needs to be replaced, then the point of origin may have to be 
readjusted as the point of origin will be different based on where the Xpress Dome was 
positioned when first powered on.  The point of origin can be offset to match the original 
point of origin to avoid reprogramming the Xpress Dome.   

 

1) Highlight Origin Position Move and twist 

the joystick to enter the programming 
window.