Vox mini3 用户指南

•  Have you installed batteries? Is the polarity correct?

Or, is the AC adapter cord connected to the rear panel

of the amp correctly?

•  Is the AC adapter plugged into an AC outlet?
•  Is the AC outlet switched on and working?
•  Is the AC adapter damaged?
There’s no sound coming from the amp

•  Is your guitar turned up?
•  Are both ends of your guitar cable plugged into where

they should be?

•  Is your guitar cable working?
•  Are  the  top  panel  MASTER  volume  and  GAIN  knob

turned up?

• Do you have headphones or anything else plugged into

the amp’s top panel PHONES jack? If “yes,” unplug!

•  Is your guitar turned up?
•  Is the top panel MASTER volume or GAIN knob turned

down low?

•  Check that the top panel MASTER volume isn’t turned

all the way down.

•  Make sure sound is coming from the amp.

You’ll need to unplug your headphones or cable from

the PHONES jack to do this, since plugging something

into this jack automatically mutes the amp’s speakers.

If there’s  still no sound from  the  amp, go to “There’s

no sound coming from the amp.” If you do hear sound,

check the headphones or cable you are hooking up to

this jack.

•  Is the tuner function turned on?

If  the  tuner  function  is  turned  on,  the  effects  will  be

bypassed. Press the TAP switch to cancel the bypassing

of the effects.

•  Is the EFFECTS or DELAY/REVERB knob set to OFF or to

a lower value?

Adjust the EFFECTS and DELAY/REVERB knob.

•  If the effects cannot be applied to the MIC signal, the DLY/

REV SEND knob might be set to a lower value. Adjust

the DLY/REV SEND knob.