DirecTV H20 用户指南

Receiving Local “Off-Air” Broadcast Channels

Th

  e DIRECTV HD Receiver can receive both satellite and locally transmitted, off -air broadcast 

channels, and will  display these local channels in the  Guide. In  order to receive off -air channels, attach 

an off -air antenna to the OFF-AIR IN as instructed in the “Choose Your Setup” section starting on page 

20. During the  Guided Setup process, be sure to select the Satellite & Antenna button when you reach 

the Satellite Dish & Off -Air Antenna screen and follow the onscreen instructions.

If you didn’t setup an off -air antenna during the guided setup, you must enter your location into the 

receiver using the Local Network Area screens in  order to receive  Program  Guide information for local 

off -air broadcast channels. When you enter your ZIP code, if there is more than one network area 

available, your receiver will show your options. Pick the one closest to you as your primary network area. 

In some cases, there may be more than two cities displayed. You may decide to also enter a secondary 

local network if more than one is available to you, but this is optional.

To scan for off -air channels and set up the local network areas after  Guided Setup, do the following:

1.  

Press 

MENU.

2.   Press SELECT on Settings in the  Quick Menu.
3.  

Select 

Setup in the  Quick Menu.

4.  

Select 

Sat & Ant from the options on the left menu.

5.   Press SELECT on the Antenna Setup button. If you have not selected your local networks yet, select 

the Local Networks button and follow the instructions until you are done.

6.  

Select 

the 

Scan for Channels button to have the receiver scan local off -air frequencies. 

When the receiver has fi nished scanning for channels, you are given the chance to edit local off -air 
channels to remove channels from the  Guide that you don’t watch, or those that have poor reception.