JVC GR-DV3000 说明手册

 EN

Once the camcorder is set, the camcorder operator
can become part of the scene in a more natural way,
adding the final touch to a memorable picture.

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
• You can tilt the LCD monitor upward to 180° so that

it faces forward and view yourself while self-
recording with the viewfinder pushed back.

Press the MENU wheel in. The Menu Screen

appears.

Rotate the MENU wheel to select “

 MANUAL”,

and press it.

Rotate the MENU wheel to select “SELF-TIMER”,

and press it. The Sub Menu appears. Rotate the
MENU wheel to select “ON 

”, and press it.

Selection is complete. Rotate the MENU wheel to
select “

 RETURN”, and press it twice to close the

Menu Screen.

To engage the Self-Timer for video recording,

press the Recording Start/Stop Button. After 15
seconds, the beep sounds and video recording starts.
To stop Self-Timer recording, press the Recording
Start/Stop Button again. The camcorder re-enters
Record-Standby mode.

Press SNAPSHOT. After 15 seconds, the beep
sounds and snapshot recording starts. After that,
the camcorder re-enters Record-Standby mode.

To end Self-Timer recording, select “OFF” in

step 4.

If “BEEP” and “TALLY” are set to “OFF” (

墌

 pg. 30), the

beep does not sound and the tally lamp does not light.

4

4

4

4