Lexmark x422 mfp 快速参考卡片
Make a simple copy
1
Use the drawing on the scanner automatic document feeder (ADF) as a
guide to feeding the paper and make sure the top of each page feeds in first.
If you are using the scanner flatbed, place your document in the top left
corner of the scanner.
guide to feeding the paper and make sure the top of each page feeds in first.
If you are using the scanner flatbed, place your document in the top left
corner of the scanner.
2
Use the numeric keypad to enter the number of copies you want to make. The
Copy screen will open automatically. (To make a copy with the default
settings, press
Copy screen will open automatically. (To make a copy with the default
settings, press
Start
).
3
Press
Start.
Make a single duplex copy
Note:
To copy double-sided original documents, you must use the scanner flatbed,
and scan each side. (Statement, A5, and Universal paper sizes with a width
of less than 182 mm or a length less than 257 mm cannot be duplexed).
and scan each side. (Statement, A5, and Universal paper sizes with a width
of less than 182 mm or a length less than 257 mm cannot be duplexed).
1
Place the original document face down on the scanner flatbed.
2
Press
Copy
.
3
Choose
Options
and then press the check mark button
(
✓
)
.
4
Choose
Duplex
and use the arrow keys to select
Long Edge
. or
Short Edge
,
depending on how you want your duplex to look.
5
Press
Start
.
6
When the scan is finished for one side, turn the original document over.
7
Choose
Scan Next Page
and then press
✓
.
Interrupting printing to make a copy
Unless disabled by your support person, printing may be interrupted to make a
copy quickly. Press the
copy quickly. Press the
Stop
button to stop the device, load your document into the
scanner, choose
Insert immediate copy job
, and then press
✓
.
Tips
•
If you are using the flatbed of the scan unit, watch the control panel for
messages. After you have scanned the page, the
messages. After you have scanned the page, the
Scan Next Page
or
Done
prompt appears. Place the next page and then press
Start
to continue
scanning. Select
Done
when all the pages have been scanned.
•
Select a
Paper Saver setting to copy two pages (or four pages) of your
original document onto one sheet of paper.
•
When the
Scale setting reads
Auto
, your copies are automatically scaled
from the size selected in
Copy From
to the size selected in
Copy To
.
Send a fax
1
Use the drawing on the scanner automatic document feeder (ADF) as a
guide to feeding the paper and make sure the top of each page feeds in first.
If you are using the scanner flatbed, place your document in the top left
corner of the scanner.
guide to feeding the paper and make sure the top of each page feeds in first.
If you are using the scanner flatbed, place your document in the top left
corner of the scanner.
2
Use the following method to fax:
a
Press
Fax
and use the numeric keypad to enter the fax number of the
person receiving the fax.
To change the default fax settings, use the navigation keys to highlight
Options and then press
Options and then press
✓
.
b
Press
Start
when you are ready to send the fax.
Canceling jobs
Fax jobs, jobs using the printer, and jobs being scanned may be canceled if they
have not yet been completed. To cancel a job, press
have not yet been completed. To cancel a job, press
Stop
and select either Cancel
scan, Cancel print jobs or Cancel faxes. Cancel scan will immediately cancel the
current scan. Cancel print jobs and Cancel faxes will open lists of waiting jobs.
current scan. Cancel print jobs and Cancel faxes will open lists of waiting jobs.
Select the job to cancel, then use the navigation arrows to highlight Delete. With
Delete highlighted, press the
Delete highlighted, press the
✓
button to cancel the selected jobs in the list.
Using shortcuts
From the Home screen, entering # and a shortcut number will open the function
associated with that shortcut. Shortcuts may also be entered in the To: field for fax,
the opening e-mail screen, or the manual entry screen for e-mail. Using a shortcut
for a Profile, such as a Scan-to-PC profile, begins the job process, so your originals
should be loaded in the scanner prior to entering the shortcut.
associated with that shortcut. Shortcuts may also be entered in the To: field for fax,
the opening e-mail screen, or the manual entry screen for e-mail. Using a shortcut
for a Profile, such as a Scan-to-PC profile, begins the job process, so your originals
should be loaded in the scanner prior to entering the shortcut.
1
Place the original in either the ADF or on the flatbed.
2
Press the # key and enter the shortcut number
If you need more information
•
Refer to the Setup Guide or the User’s Reference located on the Publications
CD for information about using and maintaining your MFP.
CD for information about using and maintaining your MFP.
Contact your administrator or Help desk if you have questions about network
printing.
printing.
Press to access paper menus
and other Administration menus
and other Administration menus
Press to set up copy jobs
Press to set up fax jobs
Press to set up e-mail and FTP jobs
Press to access held print jobs, stored
profiles and cancel print jobs
profiles and cancel print jobs
Press to navigate up and down in a menu.
Press to make a selection
Press to clear all job settings
and return to the Home screen
and return to the Home screen
Press to stop device and access
Job Cancelation or Interrupt.
Job Cancelation or Interrupt.
Press to start jobs
Press to backspace
Press to dial pause
LCD contrast control wheel
Press to enter copy quantities, fax
numbers, or shortcuts
numbers, or shortcuts
Press to change function selections, and
to move left and right in a menu.
to move left and right in a menu.
Quick Reference
P/N 16L0006
E.C. 6L0001
© Copyright 2004 Lexmark International, Inc. All rights reserved.