GE a3316abs 用户手册

Turning the dial to 0 stops cooling in both compartments—fresh food and freezer. It does not shut off power to the refrigerator.

(on some models)

The temperature control dial has nine
settings plus 0. 1 is the warmest. 9 is the
coldest. At first, set the dial at 5.
After using the refrigerator, adjust the dial 
if necessary.

Insert a coin into the slot in the middle 
of the dial and you can turn the dial to 
the setting that is best suited to your needs.
Allow 24 hours for the refrigerator to 
get cold.

Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.

Some models have a steel wire sliding shelf, a
stationary tempered glass shelf, a spillproof
shelf or two steel wire stationary shelves.
These shelves can be moved to another place
in the fresh food compartment.
The full-width sliding shelf has stop-locks.
When placed correctly on the shelf supports,
the shelf will stop before coming completely
out of the refrigerator and will not tilt when
you place food on it or remove food from it.

One end of the shelf rests on a molded side-

wall support; a bracket on the other end

hooks into a track on the rear cabinet wall.
To remove, lift the shelf up at front, then off

the support and out of the track.
To replace, select desired shelf height. With shelf

front raised slightly, hook the bracket’s top lug into

the track, then lower the shelf onto the support.

NOTE: The shelf to the right of the track is

designed to hook into the right-hand slot; the shelf

to the left is designed to hook into the left-hand slot.

2 Lift up and out

1 Tilt up

To remove a full-width shelf when the fresh
food compartment door cannot be opened fully

Lift rear

Pull forward and down

Lift rear

Pull forward

To remove the full-width shelves

Lift left side of shelf slightly.

Move shelf to the left to free its right
ends from holes in the cabinet wall.

Lower right side of shelf, move shelf to
the right and take it out.

With shelf tilted as shown, fit left ends
of shelf into holes in cabinet wall.

Lift left side of shelf slightly, swing shelf
up, fit right ends of shelf into holes in
cabinet wall, and lower shelf into place.

1

2

3

Not all features are on all models.

Excess water that may accumulate in the
bottom of the drawers should be emptied
and the drawers wiped dry.

4

(on some models)

Spillproof shelves have special edges 
to help prevent spills from dripping 
to lower shelves. To remove or replace 
the shelves, see the above instructions.