GE GBC12IAXLSS 用户指南

Remove the fresh food doorstop from 
the bottom right side of the door.
Remove the hole insert from the bottom right
side of the fresh food door.
Install the fresh food doorstop to the bottom
left side of the door.
Install the hole insert on the bottom left side 
of the fresh food door.

Place the fresh food door onto the center hinge
over the pin.
While holding the door in place, raise the top
hinge and insert the top pin into the hole in 
the door. Swing door shut.
Align the freezer door with the fresh food door
so the gap between the doors is even.
Tighten the top hinge screws by turning them
until snug. Then turn the screws a minimum 
of 1/2 turn using both hands. 

Place the top cap onto the top of the fresh food
drawer.
Using the screws removed earlier, secure 
the top cap onto the fresh food door, covering
the end of the hinge.

Screw

Screw

Remove the tab from the left side of the hinge
cover.
Install the tab into the right side of the hinge
cover.

Lift up the electronics box cover and place 
the middle portion of the hinge cover over 
the wire harnesses and under the edge 
of the electronics box cover. NOTE: Be careful
not to pinch the wiring.
Using the screws removed earlier, attach 
the hinge cover to the cabinet.
Using the screws removed earlier, attach 
the electronics box cover to the cabinet.

Remove the insert on the bottom of the door
cap with a thin-blade screwdriver. 

Install the insert into the right side 
of the door cap.

Electronics
Box Cover

Screws

Screws

Hinge
Cover

Hole

Insert

Doorstop