GE gsh22jfr 用户指南

10

The icemaker will produce seven cubes 
per cycle—approximately 100–130 cubes 
in a 24-hour period, depending on freezer
compartment temperature, room
temperature, number of door openings 
and other use conditions.

If the refrigerator is operated before the
water connection is made to the icemaker,
set the power switch in the O position.

When the refrigerator has been connected 
to the water supply, set the power switch to
the I position.

The icemaker will fill with water when it
cools to freezing. A newly-installed
refrigerator may take 12 to 24 hours to 
begin making ice cubes.

You will hear a buzzing sound each time the
icemaker fills with water.

Throw away the first few batches of ice to
allow the water line to clear.

Be sure nothing interferes with the sweep 
of the feeler arm.

When the bin fills to the level of the feeler
arm, the icemaker will stop producing ice.

It is normal for several cubes to be joined
together.

If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink. If the
ice cubes become stuck in the icemaker, turn
off the icemaker, remove the cubes and turn
the icemaker back on.

To access ice, pull the drawer out.

To remove the drawer, pull it straight out 
and lift it past the stop location.

If your refrigerator did not come already
equipped with an automatic icemaker, 
an icemaker accessory kit is available at 
extra cost. 

Check the back of the refrigerator for the
specific icemaker kit needed for your model.

Icemaker

Feeler Arm

Power
Switch

Green
Power Light