GE GSS25QGT 用户指南

Setting either or both controls to 0 does not remove power to the light circuit.

Unplug the refrigerator.

The bulb is located at the top of the
compartment, inside the dome light
shield. To remove the shield, place your
finger in the pocket at the back of the
shield. Pull the shield forward and down. 

After replacing the bulb with an
appliance bulb of the same or lower
wattage, replace the light shield.

Plug the refrigerator back in.

Unplug the refrigerator.

Remove the shelf just above the light
shield. (The shelf will be easier to
remove if it is emptied first.) On some
models, a screw at the top of the light
shield will need to be removed.

To remove the light shield, press in on
the sides, and lift up and out. On some
models, lift the light shield up and pull
it out.

Replace the bulb with an appliance
bulb of the same or lower wattage,
and reinstall the light shield. When
reinstalling the light shield, make
sure the top tabs snap securely 
into place. Replace the screw (on
some models).

Reinstall the shelf and plug the
refrigerator back in.

16

Unplug the refrigerator.

The bulb is located on the 
dispenser under the control panel.
Remove the light bulb by turning 
it counterclockwise.

Replace the bulb with a bulb 
of the same size and wattage.

Plug the refrigerator back in.

Pocket

This light is located above the top drawer.

Unplug the refrigerator.

Lift the light shield up and pull it out.

After replacing the bulb with an
appliance bulb of the same or lower
wattage, replace the shield.

Plug the refrigerator back in.