GE gcl22qgt 用户指南

下载
页码 128
11
About the crispers and pans.
ge.com
Not all features are on all models.
Fruit and Vegetable Crispers
Excess water that may accumulate in the
bottom of the drawers should be wiped dry.
On some models, the bottom drawer has 
full extension slides that allow full access 
to the drawer.
Adjustable Humidity Crispers
Slide the control all the way to the 
HI setting to provide high humidity
recommended for most vegetables.
Slide the control all the way to the 
LO setting to provide lower humidity 
levels recommended for most fruits.
H I
L O
Convertible Deli Pan 
The convertible deli pan has its own cold
air duct to allow a stream of cold air from
the freezer compartment to flow to the pan.
The variable temperature control regulates
the airflow from the Climate Keeper.
Set the control to the coldest setting to store
fresh meats.
Set the control to cold to convert the pan
to normal refrigerator temperature and
provide extra vegetable storage space. The
cold air duct is turned off. Variable settings
between these extremes can be selected.
C
O
L
D
C
O
L
D
E
S
T
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
About crisper removal.
Not all features are on all models.
Crisper Removal
The top crispers can easily be removed by
pulling the drawer straight out and lifting
the drawer up and over the stop location.
If the door prevents you from taking out 
the drawers, first try to remove the door
bins. If this does not offer enough
clearance, the refrigerator will need to 
be rolled forward until the door opens
enough to slide the drawers out. In some
cases, when you roll the refrigerator out, 
you will need to move the refrigerator 
to the left or right as you roll it out. 
To remove the bottom crisper:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace the bottom crisper:
Make sure all four swing locks are in
the unlock position.
Place the sides of the drawer into the
drawer supports, making sure the swing
locks fit on the drawer slots.
Lock all four swing locks by rotating
them to the lock position.