GE gcl22qgt 用户指南

1/4

″ (6 mm) Max.

Panels thicker than 1/4

″ (6 mm)

5/16

″ (8 mm)

3/4

″ (19 mm)

Trim kits and decorator panels.

For CustomStyle

™

models

Read these instructions completely and carefully.

Before You Begin

″ (5.1 cm)

Clearance
Handle Side

Appearance
Panel

Refrigerator
Door

1/4

″ (6 mm)

Thick Backing

3/4

″

(19 mm)

3/4

″ (19 mm) or Raised Panel

A raised panel design screwed or glued to a 1/4

″ (6 mm) thick backing, or a 3/4″ (19 mm) routed board

can be used. The raised portion of the panel must be fabricated to permit clearances of at least 2

″ (5.1 cm)

from the handle side for fingertip clearance.

Panels thicker than 1/4

″ (6 mm), up to 3/4″ (19 mm) maximum, will require that the outer 5/16″

(8 mm) of panel perimeter be no thicker than 1/4

″ (6 mm).

Weight limitations for custom panels:
Fresh Food 38 lbs. (17 kg) max.
Freezer Door 28 lbs. (13 kg) max.

1/4

″ (6 mm) Max.

Panels 1/4

″ (6 mm) thick or less

Some models are equipped with trim kits that allow you to install door panels. You can order
pre-cut black, white, bisque or stainless steel decorator panels from GE Parts and Accessories,
800.626.2002, or you can add wood panels to match your kitchen cabinets.

Panels less than 1/4

″ (6 mm) thick

When installing wood panels less than 1/4

″ (6 mm) thick, you need to create a filler panel, such as 1/8″

(3 mm) cardboard, that will fit between the face of the door and the wood panel. If you are installing the
pre-cut decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the
decorator or wood panel and the filler panel should be 1/4

″ (6 mm).

Consumer Support

oubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions