Genelec 6010A 产品宣传册
3
www.genelec.com
table stands
8000-406 with stand plate.
Short table stand
Short table stand providing a raised position for near-fi eld monitors.
Suitable for 8020A, 8030A and 8040A. Heavy black cast iron base
with anti-vibration rubber ring, diameter 17 mm. Mounting 3/8” thread
on the tube top. Preferably used together with stand plates for better
positioning. The 8020A and 8030A models have an integrated 3/8”
thread for possible direct fi xing without stand plate. The 8040A model
must be installed with a stand plate.
Suitable for 8020A, 8030A and 8040A. Heavy black cast iron base
with anti-vibration rubber ring, diameter 17 mm. Mounting 3/8” thread
on the tube top. Preferably used together with stand plates for better
positioning. The 8020A and 8030A models have an integrated 3/8”
thread for possible direct fi xing without stand plate. The 8040A model
must be installed with a stand plate.
8000-406
Table stand (K&M 23310-370-55)
8000-406
80 mm
104 mm
Speaker fi tted on
8000-425B with
stand plate.
8000-425B with
stand plate.
Associated products
8030-408
8020-408
8040-408
Adjustable height table stand
Adjustable height table stand for 8020A and 8030A with a base plate
that can be attached to a table or fl at surface. Preferably used with
stand plate and IsoPod for better monitor orientation (see picture
below). The telescopic tube length (301 to 527 mm) is designed for
optimum monitor positioning behind or above computer screens.
Screws and fi xing nuts for a 40 mm thick table are included.
that can be attached to a table or fl at surface. Preferably used with
stand plate and IsoPod for better monitor orientation (see picture
below). The telescopic tube length (301 to 527 mm) is designed for
optimum monitor positioning behind or above computer screens.
Screws and fi xing nuts for a 40 mm thick table are included.
8000-425B Fixed table stand (K&M 23360-300-55)
8000-425B, Adjustable
height table stand
height table stand